5. Getting Started
5.3.1 Inserting Media MP Nova4 & 6
Note:
The pictures shown describe an MP Nova4 DT. The process works just the same for MP Nova6 DT and MP Nova4 & 6 TT.
1. Undo the roll guide lock.
2. Remove the roll guide from the media shaft.
3. Pull handle to lift the print head from the roller.
4. Position a new media roll onto the spool and insert the media from the side into the printer’s media track.
5. Check that the media is aligned with the internal printer wall.
! Make sure the outer roll guide suits the width of the media. If necessary, open the cover and adjust the outer roll guide. (Only necessary when changing media type.)
6. Put the roll guide on the unroll shaft. Push it against the roll for optimum control.