9.Click OK to close the dialog box.
10.Click OK on the Properties dialog box to save your settings. Go on to the printer configuration options procedure for your printer.
Setting 150i Printer Configuration Options
The following procedure tells how to change the 150i printer configuration to work with the printer driver. The instructions begin with the printer powered off.
1.Power ON the 150i. When “150i/CPX” is displayed, immediately press the # key.
The # key must be pressed before the machine enters the Ready mode to access the Setup Menu.
The printer scrolls through the Setup Menu as you press the # key. Within an option, press 0 to scroll through the choices available. When the appropriate choice is displayed, press the # key to accept the choice and move on to the next option.
2.Make the following selections:
Baud = 9600
Parity = None
Bits = 8
Monitor = No
TestCard = (appropriate setting)
Save Changes = Yes
After Save Changes = Yes is accepted, the printer will reset. Allow it to go to Ready mode.
12 | Windows 95 and 98 Printer Driver Installation and Technical Reference |