Speciﬁcations, Aim red arrows | Atlantic Technology ICTS-6 LCR

��

9 5⁄8 in

(245mm)

��

New Construction and Retroﬁt Installations

Note: A new construction rough-in kit and back box kit are optionally available from Atlantic Technology. Please refer to the instructions included in those kits for their use. If the rough in kit has been used please go directly to Step 2 below.

1Cut an appropriately sized opening in the ceiling material.Be sure that the ceiling material can support the weight of the speaker.Also be sure that the sides of the opening are at least 1 ½ inches away from any beams or joists within the cavity. If it is not, the rotating clamps will be restricted in their movement and may not clamp properly.

Figure 1

2Be sure that all foreign material in the ceiling is kept out of the speaker assembly,particularly the back of the woofer cone.There is a cloth shield on the rear of the woofer, but please use care anyway.

3Mount the white frame in the ceiling.Using the red arrows on the frame as a guide (see Figure 2), roughly orient the frame towards the listening area. This will assure that the woofer is aimed correctly at the listener. Remember: This is not critical.An approximate orientation is ﬁne,since the 6 LCR’s tweeter—which can be precisely adjusted—carries most of the directional information.

Figure 2

Aim red arrows

toward listeners

4Tighten the mounting screws one at a time. As you tighten the screws, the clamps on the back of the assembly will turn and lower, grabbing the back of the ceiling and sandwiching the ceiling between themselves and the frame’s circular trim ring.

Figure 3

5Snug all four mounting screws in this manner.Be careful not to overtighten them.

6You may now install the grille into the frame by gently pushing it into the recess and paint the ceiling and the grill/frame assemblies at the same time to assure a neat, uniform appearance.

7(If you have painted the grill/frame assembly, remove the grille from the frame with a pick or awl.) Attach the previously installed audio feed wires to the speaker terminals.Simply remove 1/2 inch of insulation from the end of each input wire. Push down on the terminal connector and a large opening will appear in the shaft of the connector that is capable of holding up to 10 gauge wire. Insert the bare wire into the opening and release the terminal. Be sure to observe correct polarity, connecting the positive (+) leads to the red terminals and the negative (-) leads to the black terminals. Also be sure that no stray strands of wire touch across any terminals.

Figure 4

8Screw the black driver/crossover assembly into the white frame housing so the woofer points in the direction you selected. The screw bosses are “keyed” for easy attachment.

Figure 5

9IMPORTANT: After aiming the tweeter at the listening location, use the high frequency level adjustment, located on the tweeter assembly, to increase (+)or decrease (–) the level of high frequency sound produced by the tweeter. See Figure 6.

Figure 6

Speciﬁcations

	ICTS-6 LCR
Outer Diameter	10 7⁄8" (276mm)
Cutout Diameter	9	5⁄8" (245mm)
Mounting Depth	4	7⁄8" (124mm)
Frequency Response	54 – 20kHz, +/- 3dB
Woofer	6	½" (165mm) GLH (Graphite Loaded Homopolymer)
Tweeter	1" (25mm) LRT™ silk dome
Nominal Impedance	6	Ω
Crossover Frequency	2.2kHz
Sensitivity (1 watt/1 meter)	89dB
Recommended Power	10 – 100 Watts RMS
Weight	5 lbs.
(Optional) New Construction Kit	IC-NC-8
(Optional) Ceiling Back Box	IC-BOX-6/8 (requires IC-NC-8 kit)

Atlantic Technology

343 Vanderbilt Avenue Norwood, MA 02062

(781) 762-6300 www.atlantictechnology.com

015-1006

ICTS-6 LCR specifications

The Atlantic Technology ICTS-6 LCR is a standout in the realm of home audio systems, particularly known for its versatility and high-fidelity performance. Designed as a dedicated channel speaker, it excels in both left-center-right (LCR) configurations, making it an optimal choice for comprehensive home theater setups. With its sleek design and integrated technologies, the ICTS-6 LCR proves to be an excellent addition for audiophiles and casual listeners alike.

One of the main features that distinguishes the ICTS-6 LCR is its robust cabinet design. Constructed with high-quality materials, the enclosure minimizes unwanted vibrations and resonates, ensuring sound purity. This feature is crucial for delivering clear dialogues and impactful sound effects when watching movies or listening to music. The speaker is also wall-mountable, providing flexibility in placement and ideal for those with space constraints.

The ICTS-6 employs a sophisticated driver array composed of a 6.5-inch woofer and dual 1-inch tweeters. The woofer is engineered to produce deep, rich bass, while the tweeters enhance high-frequency response, delivering crisp and accurate highs. This dual-source design not only ensures immersive sound staging but also aids in voice clarity, making dialogue in films intelligible, even at lower volumes.

Incorporating advanced technologies, the ICTS-6 features Atlantic Technology's patented speaker design which optimizes sound dispersion. This ensures that the sound field is wide and enveloping, allowing listeners to enjoy an expansive cinematic experience from various seating positions. The speakers are also equipped with high-quality crossover networks that delicately manage frequency distribution among the drivers, promoting seamless transitions and coherence in sound.

Additionally, the ICTS-6 LCR is compatible with a wide range of amplifiers and receivers, making it highly adaptable to existing audio systems. It can handle a power range that makes it suitable for both moderate and high-power applications, ensuring that it can keep up with diverse listening environments.

In summary, the Atlantic Technology ICTS-6 LCR is a versatile and feature-rich speaker that brings high-quality audio to the home theater experience. With its durable build, impressive driver configuration, and advanced sound technologies, it stands out as an ideal solution for anyone looking to enhance their audio experience without compromise.