Daewoo L510B1 service manual Adjustment Procedure

Page 13

Adjustment Procedure

Is the H.Size	No
Is the H.Size
proper?

	Yes
	Is the	No
	noise displayed on	No
	noise displayed on
	the screen?
	Yes

Perform the AUTO

TRACKING.

	Is the	No
	noise displayed on	No
	noise displayed on
	the screen yet?

Yes

Adjust the CLOCK FINE

until the screen is

cleared.

Yes	Is the	No
	noise displayed on		End
	the screen yet?		End
	the screen yet?

Adjust the CLOCK

control.

Perform the AUTO

POSITION.

11

Image 13

Contents XGA Color Monitor Contents Safety Check Safety PrecautionsFire & Shock Hazard Symbols in the manual General Safety InformationSymbols as marked on equipment Terms in the manualGeneral Servicing Precautions Servicing PrecautionsGeneral Soldering Guidelines Electrostatically Sensitive ES DevicesReplacement IC Removal/ReplacementSmall-Signal Discrete Transistor Removal/Replacement Power IC, Transistor or Devices Removal/ReplacementTechnical Information Diode Removal/ReplacementAbbreviations General Information Pin Signal PIN ConnectorControl Panel Operation and AdjustmentHot Key Key Process Adjustment Procedure OSD Functions Adjust the width horizontal size of the screen imageSelf Diagnosis Standard Check point Alignment ProcedureAbnormal mode detect Troubleshooting HintsTrouble in Power on No Raster One color is missing One color is missingNo Video Black Power Problem Mainbord Control Block DiagramPCB Layout Control PCB Component Side Page Schematic Diagram Smps Section Exploded View & Mechanical Parts List Information of Part Description Important Safety NoticePART-NAME PART-DESC Electrical Parts ListLine Across FB2 Carbon Film