Setup, Removing the tilt/swivel stand | Computer Tech Link CTL 5fln

PRODUCT FEATURES

•The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color.

•The monitor supports a safe working environment in strict

compliance with the MPR standard for low emissions(TCO 1995 is optional).

•The monitor complies with the VESA Display Data Channel(DDC) specification for Plug & Play compatibility. Advanced microcircuitry makes set-up and configuration fast and effortless.

•The monitor features Advanced Color Controls for fine-tuning to meet your own personal tastes or application requirements. Use the on-screen controls to adjust the color temperature or RGB gain value for the best possible screen color and intensity.

•Just activate the higher refresh rates of the monitor to stabilize the screen and eliminate the annoying flicker that contributes to eye- strain and headaches.

•The borderless full-screen display capability works under all graphic modes and provides a larger viewing area than conventional monitors, giving you a better picture with more workspace.

SETUP

INSTALLING THE TILT/SWIVEL STAND

1.Ensure that the power to the monitor is off.

2.Set the monitor face down with the underside facing you. Please be careful so as not to scratch the monitor screen.

3.Align the four hooks on the stand with the guide holes of bottom chassis of the monitor.

4.Insert the hooks into the guide holes.

5.Slide the tilt/swivel stand toward the front of the monitor until the latch locks in position.

6.Turn the monitor and the stand upright.

PUSH

<Removing the tilt/swivel stand>

If you want to remove the tilt/swivel stand on the monitor, press the latch and pull the tilt/swivel stand toward the back of the monitor. Lift the stand to separate.