Comtrol quick start Installing Your RocketPort 550 hardware

Page 3

The Linux RocketPort 550 Drivers allow application space programs to perform asynchronous communications using boards from the Comtrol RocketPort 550 range.

1. Installing Your RocketPort 550 hardware

Take care when you handle the RocketPort 550 PCI cards, like any electronic device, they are sensitive to static electricity. Use normal static precautions such as wearing an earth ground strap.

Power down the host PC and disconnect its mains input.

Follow the host PC instructions for access to the PC and the installation of additional cards.

You may install up to 4 RocketPort 550 PCI cards in one PC.

Ensure the front panel retaining screws are fitted.

Follow the host PC instructions for re assembly of the host PC its cabling and re-fitting of safety covers.

Re-connect the host PC mains input, power up the PC and login as root.

3

Image 3
Contents Hardware Reference Card Quick Start Linux DriverRocketPort 550 Linux driver recompilation Installing the RocketPort 550 Linux Device DriverInstalling Your RocketPort 550 hardware Installing the RocketPort 550 Linux Device Driver software Step Run the installation script Page Please enter the Special Device name for terminals … and for modem ports Viewing the RocketPort 550 Port Installation Application Programming Driver RemovalPort Names Page RocketPort 550 Linux driver recompilation Compilation procedureRocketPort 550 Cable Types Page RocketPort 550 4 RJ45 Cable Pin Out RocketPort 550 8 RJ11 Cable Pin OutRTS Comtrol Corporation Headquarters are at Technical SupportProduct 5V Current +12V Current SpecificationsRocketPort 550 card Specification Environmental Condition SpecificationCopyright Trademarks Copyright and Trademarks