Important Safety Information
Introduction
WARNINGPower inverters contain components that tend to produce arcs or sparks. To prevent fire or explosion, do not install the inverter in areas or compartments containing batteries or flammable materials or in locations that require
WARNINGTo reduce the risk of fire, do not cover or obstruct the ventilation openings. Do not install inverter in
Caution:RechargeableAppliances
Certain chargers for small nickel cadmium batteries can be damaged if connected to the Cobra 2500 watt inverter. Two particular types of equipment are prone to this problem:
Important Safety Information
Introduction
Cobra 2500Watt OutputWaveform
Some very sensitive electronic equipment may not operate satisfactory on “square wave” or “modified sine wave.” The output waveform is referred to as “square wave” or “modified sine wave.” It is a stepped waveform designed to have characteristicssimilar
to the sine wave shape of utility power. A waveform of this nature is suitable for most AC loads (including linear and switching power suppliers used in electronic equipment, transformers and motors).
Plug In Directly
DangerousVoltages
1.Small
2.Certainbattery chargersfor battery packs used in hand power tools. These chargershave a WARNINGlabel statingthat dangerousvoltagesare present at the battery terminals.
This problem does not occur with the vast majority of battery operated equipment. Most use a separate charger or transformer that is plugged into the AC receptacle and produces a low voltage output. If the label on the AC adapter or charger states that it produces a low voltage AC or DC output (less than 30 volts), the inverter will have no problem powering the adapter safely.
|
|
|
2 English | Nothing comes close to a Cobra® 3 | |