High Frequency Energy Control

8	High Frequency Energy Control

AT-1 High Performance Loudspeaker with H-PAS™ Technology

This control changes the relative output level of the tweeter. It has been designed to help compensate for different room acoustics and personal listening preferences. The ‘0’ position is the most “accurate” frequency response, but that does not mean that it is necessarily the“recommended” position.

The“+” and“–“ positions adjust the tweeter’s output by very slight amounts over its entire operating range,from 2kHz to 20kHz.These positions change what’s known as the speaker’s“spectral balance” by altering the proportion of treble to bass over a wide frequency band.

Such adjustments,although relatively subtle,can make the AT-1 more suit- able to different acoustic environments or tailor its sound more closely to one’s tastes.

We encourage you to experiment with the different tweeter settings to find the one that sounds best in your room.

Figure 8

AT-1

High Fidelity

Loudspeaker

System

Caring for your Speakers

Clean your cabinets using a soft, lint-free cloth.If you wish, you can slightly moisten the cloth with plain water. Do not use any other cleaning agents or chemicals. Be careful not to get any water on the driver cones or tweeter domes. After carefully removing the grilles from the speakers by pulling them forward, gently clean the grilles with a quick pass from a vacuum cleaner with a brush attachment. This should remove any dust accumula- tion.Reattach them by lining up the magnet depressions in the back of the grilles with the magnets on the speaker baffle and slowly moving them closer until they connect with each other.

Avoid placing your speakers in direct sunlight or near a source of heat that may, over time, damage the finish.

IMPORTANT: SAVE YOUR BOXES! If you can do so, save the cartons, packing pieces, and plastic bags that came with your speakers. They will be useful in case you move or have to ship your loudspeakers for any reason. In any case, save all packing materials until you are certain that the systems have suffered no damage in shipment. If you find such damage, either visible or internal, contact your dealer immedi- ately.

AT-1 specifications

The Atlantic Technology AT-1 is a meticulously designed loudspeaker that embodies a blend of innovative technology and refined acoustics, making it an exceptional choice for audiophiles and casual listeners alike. This two-way bookshelf speaker is known for its impressive soundstage, detailed reproduction, and versatility across various listening environments.

One of the main features that set the AT-1 apart is its advanced driver configuration. The speaker is equipped with a 5.25-inch polygraphite driver, which provides a robust midrange and deep bass response. This driver is accompanied by a 1-inch aluminum dome tweeter designed to deliver exceptionally clear highs. The tweeter’s design minimizes distortion and enhances transient response, allowing for intricate details in music and audio to be reproduced with precision.

Another notable characteristic of the AT-1 is its rear-firing bass port, which contributes to improved low-frequency performance. The port design not only helps optimize airflow for deeper bass but also allows for flexible placement in various setups. This feature is particularly beneficial in smaller rooms where placement options may be limited.

The AT-1 incorporates Atlantic Technology’s proprietary sound dispersion technologies, which promote a wide and even soundstage. This technology allows listeners to experience immersive audio, whether they are seated directly in front of the speaker or off to the side. The speaker’s construction includes a solid MDF cabinet, which minimizes resonance and unwanted vibrations, further enhancing the clarity and accuracy of sound reproduction.

In terms of aesthetics, the Atlantic Technology AT-1 presents a modern yet timeless design. Available in multiple finishes, it can seamlessly blend into various interior decors, making it a visually appealing addition to any audio setup. The speaker’s compact size also makes it easy to integrate into smaller spaces without sacrificing audio quality.

The Atlantic Technology AT-1 is engineered for versatility, capable of functioning as part of a home theater system or as standalone stereo speakers. Whether you're watching movies or listening to music, the AT-1 delivers an audio experience that excels in both clarity and richness, ensuring that every note and sound effect is enjoyed to the fullest.

In conclusion, the Atlantic Technology AT-1 represents a combination of cutting-edge design, advanced technology, and aesthetic appeal. It is a speaker that not only meets but exceeds the expectations of discerning listeners, making it a staple in any high-quality audio environment.