Cobra Electronics CPI 850 warranty Installation Requirements

Page 5
On/Off Switch to Off
Connect Terminals
Connect Power Source
On/Off Switch to On
Connect Test Load
4 English

Quick Evaluation

Before Installation

Introduction

To check your inverter’s performance before installation:

1. Turn the inverter off (see page 11 for details). If the power source is a DC power supply, switch it off as well.

2.Connect cables to power input

terminals (see page 7 for details).

3.Connect cables to power source (see page 7 for details).

4.Check to make sure all

connections are secure.

5.Turn the inverter on. If the power source is a DC power supply, switch it on first.

6. Plug in the test load.

The inverter should supply power to the load. If the inverter is not working properly, refer to the troubleshooting guide on page 14 or power and protection indicators section on page 12.

Installation

Requirements

Installation

Installation Requirements

•

The inverter must be installed in an area that meets all of the following requirements:

A.Dry

Do not place in an area where water can drip or splash on the inverter.

B.Cool

Ambient air temperature should be between 30°F and 105°F (0°C and 40°C). The cooler the better.

C.Ventilate

Allow at least one inch (three cm) of clearance around the inverter for proper airflow. Make sure that ventilation openings on the ends of the unit are not obstructed.

D.Safe

Do not install the inverter in the same compartment as a battery or in any compartment that contains flammable liquids such as gasoline.

E.Close to Battery

Install unit as close to battery as possible (without being in the same compartment) to minimize the length of cable required to connect the inverter to the battery. It is better and cheaper to run longer AC wires than longer DC wires (cables).

CAUTION To avoid fire, do not cover or obstruct ventilation openings. Do not install inverter in a zero- clearance compartment. Overheating may result.

CAUTION The inverter must only be connected to batteries with a nominal output voltage of 12 volts. It will not work with a 6 volt battery, and will be damaged if it is connected to a 16 volt battery.

WARNING This unit contains components which can produce arcs or sparks. To prevent fire or explosion, do not install in compartments containing a battery or flammable materials, or in a location which requires ignition protected equipment.

Nothing comes close to a Cobra® 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Cobra line of quality products includes How Your Cobra Power Inverter WorksOur Thanks to You Hours a day, 7 days a week 773-889-3087 phoneContents Product FeaturesGeneral Precautions Important Safety InformationImportant Safety Information Quick Evaluation Before Installation Quick Evaluation Before InstallationCobra 800 Watt Output Waveform Your inverterInstallation Requirements Connecting Cables Connecting CablesTo connect the cables between the inverter and the battery MountingConnect cable to the power source To determine the battery ampere-hour capacity you require Power ConsumptionPower Consumption Power and Protection Indicators Power and Protection Indicators Operating LimitsOperating Limits Power Output Green Light Red Light and/or AlarmSpecifications Troubleshooting GuideTroubleshooting Guide SolutionMaintenance Product Service Warranty and Trademark AcknowledgementMaintenance Product Service

CPI 850 specifications

The Cobra Electronics CPI 850 is a versatile and reliable power inverter designed to meet the power needs of outdoor enthusiasts, emergency preparedness, and everyday use. As one of the leading products in Cobra's lineup, it offers a perfect blend of performance and user-friendly features, making it an ideal choice for anyone looking to convert DC power from a car’s battery or a solar setup into usable AC power.

One of the standout features of the CPI 850 is its 850 watt continuous power output, which allows users to power a range of devices such as laptops, small appliances, and other electronics efficiently. With a peak surge power of up to 1700 watts, it can accommodate devices that require a higher energy spike at startup, ensuring that users have the flexibility to power both sensitive electronics and robust appliances.

The inverter employs advanced technologies, including a built-in cooling fan that prevents overheating during extended use, a critical feature for maximizing longevity and performance. It also includes multiple output options with two standard AC outlets and two USB ports, making it easier than ever to charge or power multiple devices simultaneously. The USB ports are especially convenient for charging smaller electronics like smartphones and tablets on the go.

The CPI 850 is designed with safety in mind, featuring built-in protection mechanisms such as overload, short circuit, and over-temperature protection, which safeguard both the inverter and connected devices from damage. Additionally, the inverter has an LED power indicator that allows users to monitor operational status easily.

Portability is another highlight of the Cobra CPI 850. It is compact and lightweight, allowing users to easily transport it in their vehicle or carry it along on outdoor adventures. This makes it an excellent companion for camping trips, tailgating, and even as a backup power supply during power outages.

In terms of construction, the CPI 850 is built to withstand rugged conditions. Its durable design ensures resilience against various environmental factors, making it suitable for both recreational and emergency applications.

Overall, the Cobra Electronics CPI 850 power inverter stands out through its blend of power, versatility, and safety features, making it an essential tool for anyone in need of portable power solutions. Whether you are looking to power essential devices on the road or in the great outdoors, the CPI 850 is equipped to meet your needs effectively.
Top Page Image Contents