Cobra Electronics CPI 300 manual Connecting to Power Source, 1RECHARGEABLE Appliances

Page 4

1RECHARGEABLE APPLIANCES

QUICK CHECKOUT 2

CAUTION

Certain rechargers for small nickel cadmium batteries can be damaged if connected to the CPI 300. Two types of equipment are particularly prone to this problem:

1.Small battery operated appliances that can be plugged directly into an AC receptacle for recharging, including flashlights, razors, and night lights.

2.Certain battery chargers for battery packs used in hand power tools, specifically those that have a WARNING label stating that dangerous voltages are present at the battery terminals.

Problems do not occur with the vast majority of battery operated tools, most of which use a separate charger or transformer that plugs into an AC receptacle and produces a low voltage output. If the label on your tool’s AC adapter or charger states that is produces a low voltage AC or DC output (less than 30 volts) you

can safely power the charger with your CPI 300.

In order to check the performance of your CPI 300 before installing it, please have the following on hand:

1.A 12 volt DC power source (such as a vehicle battery)

2.The 2 foot cigarette lighter plug wire and the 2 foot direct-to-battery 12 gauge wire

3.A test load such as a lamp or other small appliance that can be plugged into the AC receptacle on the inverter

Power Source

You will need an 11 to 15 volt DC power source capable of supplying enough current to run the test load. As a rough guide, divide the wattage of the test load by 10 to get the current (in amperes) that the power source must supply.

A fully charged standard automotive battery will work fine.

Connecting to the

Power Source

Your CPI 300 comes with both a 20 inch cigarette lighter plug wire and a 20 inch direct-to- battery 12 gauge wire. The cigarette lighter plug is suitable for operating the inverter at loads up to 150 watts.

CAUTION

When operating any loads over 150 watts, connect the inverter directly to the battery.

Remove any jewelry. Be careful not to short circuit the battery with a metallic object (wrench, etc.)

WARNING

Do not connect to the power source if flammable fumes are present. Explosion or fire may result. Thoroughly ventilate the battery compartment before making a connection.

1

2

Image 4
Contents Power Inverter Nothing comes close to a CobraCobra 300W Output Waveform For Best ResultsIntroduction Inverter Works Table of ContentsCustomer Assistance Connecting to Power Source Power Source1RECHARGEABLE Appliances Testing Power InverterInstallation Operation Turning on YourOn/Off Switch Fault IndicatorPower Output Input VoltageService 6TROUBLESHOOTING GuideMaintaining Your InverterAs United Parcel Service Problem you are havingSend the complete unit Some form of proof-ofSpecifications Limited 2-YEAR WARRANTY10West Cortland Street

CPI 300 specifications

Cobra Electronics CPI 300 is a versatile and reliable power inverter designed to convert 12V DC power from a vehicle's battery into 120V AC power. Ideal for outdoor enthusiasts, travelers, and anyone who requires portable power, the CPI 300 stands out with its unique blend of practicality and cutting-edge technology.

One of its main features is its continuous power output of 300 watts, with a peak output of 600 watts. This allows users to power multiple devices simultaneously, including laptops, small appliances, and electronic devices. With two AC outlets, the CPI 300 can accommodate various devices, making it suitable for both work and leisure activities.

The CPI 300 incorporates advanced technologies that enhance its operation and efficiency. One notable feature is its built-in safety protections, including short circuit, over-voltage, and over-temperature protections. This ensures that both the inverter and the connected devices are safe from potential electrical issues, providing users with peace of mind during use.

Moreover, the inverter is equipped with a USB port, allowing users to charge mobile devices directly without the need for a separate charger. This is especially convenient for those who rely on smartphones and tablets for navigation, communication, or entertainment while on the road.

Another characteristic that makes the Cobra CPI 300 appealing is its compact and lightweight design. Weighing just under three pounds, it is easy to transport and can be stored in a car trunk or backpack without taking up much space. Its rugged construction also enhances durability, making it suitable for outdoor use in various environments.

The CPI 300 features an LED indicator that provides real-time information about the inverter's operational status, allowing users to monitor performance effortlessly. Its user-friendly design includes an easy-to-access on/off switch, ensuring that anyone can operate it without hassle.

In conclusion, the Cobra Electronics CPI 300 is an exceptional power inverter that combines essential features, advanced safety technologies, and portability. Whether for camping trips, road trips, or emergency situations, it offers reliable power for various devices, making it a must-have accessory for anyone in need of on-the-go electricity.