Atlantic Technology T70.1PBM Model T70.1 PBM Specifications, Subwoofer Troubleshooting Guide

Page 11

Atlantic Technology®

Model T70.1 PBM Specifications

Type/Features

Powered Subwoofer with Sealed Acoustic-Suspension Enclosure

 

24 dB/Octave variable crossover

 

Line-level stereo inputs and outputs

 

High-level stereo inputs and outputs

 

Absolute phase invert switch

 

Auto signal sensing on/off

Driver

(1) 10" long-throw woofer, 2", 4-layer vented voice coil, vented

 

motor system

Amplifier Power

125 Watts RMS discrete linear Class A/B power amplifier

Amplifier Distortion

<0.025%

Frequency Response

25-150 Hzʱ3dB (in room)

Peak output (SPL)

103dB

Dimensions

11.375in x 16.5in x 14.9in; 290mm x 420mm x 380mm

Weight

37.5lbs.; 17kg.

Specifications are those in effect at the time of printing. Atlantic Technology reserves the right to change specifications or designs at any time without notice. Dolby Digital, AC-3, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation. DTS is a registered trademark of DTS Technology.

Subwoofer Troubleshooting Guide

Once your subwoofer is set up, you should have many years of maintenance free enjoyment from your system. However, if you should encounter a problem, refer to the following guide to help find the solution. If the problem persists, please contact your local authorized Atlantic Technology dealer.

Problem

Possible Cause

Possible Solution

No bass output

AC power cord unplugged or plugged into a non-working outlet.

 

Input cables not securely connected or defective.

Plug into a working outlet.

Check all connections, then try another input cable.

Audible buzz

Input cable not securely connected or defective.

or hum

Single HI LEVEL input connected to the RIGHT channel only.

 

Ground loop through antenna or cable TV system input.

Check all connections, then try another input cable. Connect to the LEFT input channel.

Test by disconnecting antenna and/or cable system input leads. If hum goes away, install isolation balun(s) at that point.

Weak bass

Subwoofer too far from the wall.

 

VARIABLE INPUT LEVEL set too low.

Move the subwoofer closer to a wall or corner. Turn control up somewhat.

Weak bass: vague stereo image

Input source connected to HI LEVEL inputs is wired out of phase.

Check speaker wire connections and reconnect in proper phase.

 

 

 

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Atlantic Technology Sealed enclosure for low distortion and deep bass output FeaturesTwo high level inputs, two high level outputs Two line inputs, two line outputsHigh-Level Connection Connecting Your SubwooferUsing the Low-level Output Low-Level ConnectionAtlantic Technology Out/Low Level Speaker Out/ High Level In for Stereo Subwoofers Power ConnectionDual Subwoofer Placement Placement and OperationUsing the Crossover Control Subwoofer Tuning Using the Variable Level ControlCare and Feeding of Your Subwoofer Phase Invert ControlWord About Bass, Center Channel Modes, and System Set Up Subwoofer Troubleshooting Guide Model T70.1 PBM SpecificationsFor Future Reference

T70.1PBM specifications

The Atlantic Technology T70.1PBM is a remarkable powered subwoofer that represents an excellent solution for audio enthusiasts seeking superior bass performance in their home theater or music systems. Designed to deliver deep and impactful low frequencies, the T70.1PBM stands out due to its robust construction and innovative technologies.

One of the major highlights of the T70.1PBM is its 10-inch bass driver. This driver is engineered with a high-excursion design that allows for greater movement, translating into powerful and precise bass reproduction. The driver is paired with a state-of-the-art built-in amplifier that delivers a substantial 200 watts of power. This combination ensures not only quality sound but also the ability to fill larger rooms with rich, immersive bass.

The subwoofer is equipped with Atlantic Technology's proprietary Bass Management System, enabling users to seamlessly integrate the T70.1PBM with a variety of audio setups. This system allows for easy adjustment of bass response to match the acoustic characteristics of your room, providing a highly customizable listening experience. Users can adjust settings like phase control and low-pass filter to tailor the output to their specific preferences.

Moreover, the T70.1PBM features both line-level and speaker-level inputs, making it versatile enough to work with a range of audio components. Whether integrating with a receiver, a standalone amplifier, or even a soundbar, this subwoofer is designed for compatibility.

In terms of aesthetics, the T70.1PBM has a sleek, modern design that allows it to blend harmoniously with various home decors. Its cabinet is constructed from MDF to minimize unwanted resonance, improving overall sound quality. The finish is both attractive and durable, ensuring that the subwoofer looks great while standing up to the rigors of everyday use.

With its exceptional build quality, powerful performance, and user-friendly features, the Atlantic Technology T70.1PBM is an outstanding option for anyone looking to enhance their audio experience. Whether you're watching movies or listening to music, this subwoofer promises to deliver deep, rich bass that breathes life into your favorite media.
Top Page Image Contents