Citizen CT-770II manual Rep

A : Add mode position

The second lowest digit automatically becomes the decimal point position without depressing decimal point key.

0,2,3 : Specified decimal point position

A decimal point is always put at a specified position of result.

F: Floating decimal point position Floating decimal point mode is used.

Rounding Selector

: Cuts off the decimal to the specified number of places.

5/4 : Rounding off the decimal to the specified number of places.

: Rounding up the decimal to the specified number of places.

The signs of the display mean the following :

GT	: Grand Memory Loaded.	M		: Memory Loaded.
REP	: Replay mode.	ER	: Overflow-error.
CRT	: Correction mode.	IN>		: Insert mode.
MAX	: Maximum value display.	AVG : Averagevaluedisplay.
MIN	: Minimum value display.
	: Item counter ( Max : 100 ).
K	: Memory constant is loaded.
K=	: Memory constant display.
SHIFT : The SHIFT key has been pressed.
MU	: Mark-up/down display.
	-E2-

HDBMRP9N-E.doc SCALE 1:1 Size: 125x90mm 2003/11/26