(36) Printing Download Bit Image (GS / m) Code : [1D]h + [2F]h + m
*{0 ≤ m ≤ 3} Data is described in Hex code. Prints download bit iamges in a mode specified by m.
•Modes can be selected by m are shown in table for selection with m are shown below.
m | MODE NAME | DOT DENSITY IN | DOT DENSITY IN |
|
| VERTICAL DIRECTION | HORIZONTAL DIRECTION |
0 | Normal mode | 203 DPI | 203 DPI |
1 | Double wide mode | 203 DPI | 101 DPI |
2 | Double high mode | 101 DPI | 203 DPI |
3 | Double wide/double high mode | 101 DPI | 101 DPI |
•When data exist inside the print buffer, this command is ignored.
•When a download bit image has not been defined, this command is ignored.
•A portion of a download bit image exceeding one line length is not printed.
•A download character and a download bit image cannot be defined simultaneously.
(37) Starting / Ending Macro Definition (GS :) Code : [1D]h + [3A]h
Specifying starting / ending macro definition. Maximum content available for macro definition is 2048 bytes. A portion exceeding 2048 bytes is not defined.
•Even with ESC @ (initialization of the printer) having been executed, defined content is not cleared. Therefore, it is possible to include ESC @ into the content of macro definition.
•Normal printing operation is carried out even while in macro definition
(38) Macro Execution (GS ^ n1 n2 n3) Code : [1D]h + [5E]h + n1 + n2 + n3
*{0 ≤ n1 ≤ FF} {0 ≤ n2 ≤ FF}
{0 ≤ 3 ≤ 1} Data is described in Hex code. Executing contents defined in macro.
•"n1 - n3" indicate as follows:
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2 x 100 msec is given for every execution. n3 : Macro execution mode
n3 | Mode |
0 | Continuous execution |
1 | Execution by LF SW |
38 | CITIZEN |