Sanyo FXCD-500 manual Troubleshooting

Page 22

TROUBLESHOOTING

Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit Before having the unit serviced, refer to the troubleshooting chart below

Symptom

Cause

Solution

The compact disc does not

The volume control is

Turn up the volume control

play when inserted into the

turned down

 

unit

The power connections are

Check the +I 2V and ground

 

not wired correctly

connections

No power

The vehicle ignition is

Switch the ignition to the “ON” or

 

switched off

“ACC” position

 

The fuse is blown

Replace the fuse with another

 

 

15A fuse

The unit does not work

The microcomputer has

Eject the disc, then insert it again

properly (Eject, Load,

been affected by electrical

 

Play)

noise

 

The sound from the CD

The road surface is rough

Wait for the road surface to

player skips

 

improve before playing a disc

 

The unit is not mounted

Install the unit securely

 

securely

 

 

The disc is defective

Try another disc

 

 

If it plays properly, the first disc

 

 

may be defective

 

The disc is dirty

Clean the disc as explained on

 

 

pages 3-4

No radio reception

The antenna cable is not

Insert the antenna cable firmly

 

connected

into the antenna jack on the unit

The radio does not stop on

The signals are weak

Select a station using manual

any stations when

 

tuning

automatic tuning is used

 

 

-21-

Image 22
Contents Espafiol 31-59 EnglishOperating Instructions Librito DE InstruccionesObligations Sanyo Mobile Audio Model FXCD-500 Limited WarrantyExclusions Contents AcautionTification logos may not play properly Compact Disc CareLabel Side Do not use non-conventional discs such as ’ Ing spray Preset Channel Auto Travel Safety CertificationDisplay Auto Travel Preset ATP Tape playing direction Disc Digital DisplayHOW to Replace the Front Panel HOW to Detach the Front Panel RELEASEKNoBDetachable Front Panel General Operation Turning the Power onTurning the Power OFF Electronic ControlsRadio Selection Button BND To Cancel the Beep TonesBassxpander Basx l/2 Clock BUlTON DispStoring Preset Stations Selecting Radio ModeRadio Tuning Radio OperationATP Auto Travel Preset Operation PRESET-SCAN Operation using BND buttonFast Forward and Rewind Switching the Tape DirectionTape Operation Press the Tape buttonLocating the Beginning of a Program Amss ,5,6 Dolby B Noise Reduction ButtonScan Mode Repeat ModeCD Operation Switching to CD ModeLoading and Ejecting the CD Scan Mode Playing the Beginning Shuffle ModeRepeat Mode Skipping TracksSelecting a Disc CD Changer OperationSkipping Tracks Scan Mode Playing the Beginning Tracks Discs RepeatmodeIncorrectly Check errorCause Disc and insert it properlyClock Display Mode ChangeAdjusting Time ClockHints for Proper and Safe Operation Troubleshooting Installation Accessories and HardwareSecurity of Front Panel Before Installation InstallationIS0 Mounting with Removable Trim Ring Installation Procedures Installation with Mounting KitInstallation to TOYOTA/NISSAN Vehicles Only USE M8 x 6 ScrewUnit Removal Jagged side of the key should face outwardGreen/Bw Electrical ConnectionsLeft Speaker Right Do Not Connect Antenna socket CD Changer DIN Sot Line OUT/CD Changer ConnectionsRed wlite External Amplifier75Q RAPE Section87 5MHz 107 9MHz 15dBf 30dBf 50Hz 12 5kHz 1OOdB 2opvMaximum Output Power 45Wx4CH PowerPower Rating 10% THD 24Wx4 THD 2OWx4

FXCD-500 specifications

The Sanyo FXCD-500 is a sophisticated and versatile digital camera that stands out in the market due to its array of features and advanced technologies. This camera embodies Sanyo’s commitment to quality and performance, making it ideal for both amateur photographers and seasoned professionals.

One of the standout features of the FXCD-500 is its impressive 12-megapixel sensor, which captures stunningly detailed images. The sensor, combined with Sanyo’s advanced image processing algorithms, ensures that photographs are sharp, vibrant, and true to life. The camera also supports high-definition video recording at 1080p, allowing users to capture smooth and clear video footage. This capability is perfect for those who want to create high-quality video content for social media or personal projects.

The FXCD-500 boasts a user-friendly interface that includes a large, high-resolution LCD screen. This display allows for easy navigation through the camera’s settings and menus, while also providing a clear view for composing shots. The camera features a variety of scene modes and automatic settings, making it easy to achieve great results in different lighting conditions and environments.

In addition to its core photography functions, the FXCD-500 incorporates several innovative technologies. One such feature is the optical image stabilization system, which minimizes the effects of camera shake, ensuring that images remain crisp and clear even in low-light conditions. The camera also includes a fast autofocus system, which allows users to quickly lock onto their subjects, reducing the chances of missed shots.

The FXCD-500 is equipped with various connectivity options, including built-in Wi-Fi, which facilitates easy sharing of images and videos to smartphones and social media platforms. This feature enhances the user experience by allowing instant uploads and remote control functionality through compatible apps.

Another noteworthy characteristic is its compact and lightweight design, making it highly portable for everyday use and travel. The robust build quality ensures durability, which is essential for photography enthusiasts who frequently shoot in dynamic environments.

Overall, the Sanyo FXCD-500 combines excellent image quality, user-friendly operation, and modern connectivity features, making it a compelling choice for anyone looking to elevate their photography experience.