Brainboxes BL-819, BL-830 manual The Low power modes can be turned on or off here

Page 9

The Low power modes can be turned on or off here.

The Low power modes can be turned on or off here.

The settings button will allow you to configure the particular parameters that are used for both Sniff and Park Mode.

The Last configuration options are the Bluetooth

Connection Settings.

The User is able to change the Device Mode, Pin Code, Switch Role status, select a Partner Device and chose the Bluetooth Profile which is used to connect

Finally the user will be able to view all the settings which will be applied to the Adapter, and confirm whether they wish to apply them to the device.

If ‘Cancel’ is selected here (or at any time during the

Wizard) the Wizard will exit without changing any

Settings.

Manual for BL-819 / 830

© Copyright Brainboxes Limited 2005

Page 9 of 41

Image 9

Contents RS232 Bluetooth Adapters VersionBL-819 Product Manual2.1. BL-819 12. TROUBLESHOOTING 11. CUSTOM FACTORY CONFIGURATION13. TECHNICAL SPECIFICATIONS 14. REGULATORY INFORMATION1. Introduction 1.1. Preamble1.2. Products and Firmware 2.2. Comparison of BL-819 and BL-830 Features 2. Physical Product Features2.3. BL- 819 / 830 Power Options 2.1. BL-8193. Product Configuration 3.1. Configuration features at a glance3.2. Installing the Configuration Applications 3.3. Opening the Configuration Applications 3.4. Using the Configuration WizardPage 7 of There are two types of handshaking RTS/CTS and DTR/DSR The Low power modes can be turned on or off here Page 10 of 3.5. Using the Configuration Utility3.5.1. Device Info 3.5.2. Port Settings 3.5.3. Support/LinksBaud Rate 3.6. Current SettingsParity Stop BitsPIN Code Client/ServerPartner Device Page 14 of Connect UsingDevice Address 3.7. Advanced SettingsDevice Name DiscoverabilityWho can it connect to? Who can Pair?Possible use Who can Connect?Class of Device Switch RoleHandshaking Connect SchemeLow Power Mode Interactive MenuPage 18 of 3.8. Default settings 3.9. Upgrade DevicePage 19 of 4.1. Accessing the configuration menus and commands 4. Alternative Product Configuration4.2.1. Navigation 4.2. Configuration Menu4.2.2. Main Menu 4.2.3. Communications ParametersPage 22 of 4.2.4. Handshaking 4.2.5. Bluetooth Parameters4.2.6. Display, Restore and Update Current and Factory Settings Page 25 of 4.2.7. Disabling Interactive Menu4.2.8. Upgrading Firmware e.g. svc?CR 4.3. Command Interface6. Resetting the Product 5. Remote Configuration7. Upgrading your device Then Click “Next” A progress bar indicates how the procedure is going 8.1. Configuring the communications parameters 8. Physically connecting to your RS232 device9.1. Client/Server Pair “Cable Replacement” 9. Connecting adapters over Bluetooth9.1.3. Configuration by Commands 9.1.2. Configuration by Menu9.3.1. Configure and connect the adapter 9.3. Server Connecting to adapter from a remote Bluetooth device9.3.2. Bluetooth Enable your PC 9.3.3. Discover the device9.3.5. Connect to the Serial Port profile 9.3.4. Secure the relationship11. Custom Factory Configuration 10. Worked Examples10.1. Scientific equipment data logging 12. Troubleshooting 13. Technical Specifications 13.2. Power requirements13.1. Storage and Operating Environment 14.1. Europe - EU Declaration of Conformity 14. Regulatory Information14.2. Important Notice for use in France and Italy 14.3. Rest of WorldVersion Version HistoryDate Author