2 Ethernet Interface Adapter User’s Guide
The adapter provides 802.3 Ethernet connectivity, TCP/IP host connectivity, and Telnet application connectivity.
Configuring The Terminal
In order for the adapter to function successfully, the terminal should be configured as follows:
Data Format
8 data bits
1 stop bit
No parity
EIA Baud Rate
38400
EIA Communication Protocol
None
Xon/Xoff
DTR/DSR
Both
This setting should match the Comm Protocol setting of the adapter (see page 9). If the adapter’s Comm Protocol is set to None, the terminal could lose data.
Emulation
This adapter works with all the standard terminal emulations. However, the host emulation should match the terminal emulation.
For example, a user logs on to a UNIX system, and selects the host emulation to be AT386 (using the command TERM=AT386 <CR> followed by set TERM<CR>). At this point, the user must make sure that the terminal emulation is also set to AT386 (by entering the terminal setup and checking the emulation parameter).
A terminal in