ATON A82SW, A62W, A61W, A60W Wiring Methodology, Wiring Amplifier to Speakers-2 Conductor Direct

Storm Series In-wall Speakers

Wiring Methodology

There are three common scenarios for connecting speakers to an audio system. Figures 3.2 to

3.4show stereo pairs, Figure 3.5 shows a Home Theater wiring scheme, and Figure 3.6 shows passive subwoofer wiring. Figure 3-7 depicts the wiring method when using an A82SW Passive Subwoofer and two stereo speakers (Sub/Sat confi guration).

•Two separate 2 conductor speaker wires run from the A/V Receiver or amplifier to each stereo speaker.

A/V Receiver/Amplifier

+

-

+

-

+

-

+

-

Figure 3.2 - Wiring: Amplifier to Speakers-2 Conductor Direct

•One 4-conductor speaker wire runs from the amplifier to a splice near one speaker. A 2-conductor wire runs from the splice to each speaker.

A/V Receiver/Amplifier

4	+
Conductor
	-
Wire
	+

-

Splice

+

-

+

-

2

Conductor

Wire

Figure 3.3 - Wiring: Amplifier to Speakers-4 Conuctor to 2 Conductor

•One 4 conductor speaker wire runs from the amplifier to a stereo volume control, then one 2 conductor speaker wire runs to each stereo speaker.

A/V Receiver/Amplifier

Volume

Control

4		+
Conductor
	-
Wire
	+

-

	2
+		Conductor
			Wire
-

+

-

Figure 3.4 - Wiring: Amplifier to Speakers w/ Volume Control

4 ©2007 • All rights reserved.