Auto Page A780 user manual IDE Configuration

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification.

3.4.4 IDE Configuration

	BIOS SETUP UTILITY
Advanced
	Configure onboard
IDE Configuration	serial ATA
	controller.
Onboard SATA Controller	[Enabled]
SATA Operation Mode	[IDE]
IDE1 Master	[Hard Disk]
IDE1 Slave	[Not Detected]
SATAII_1	[Not Detected]
SATAII_2	[Not Detected]
SATAII_3	[Not Detected]
SATAII_4	[Not Detected]	Select Screen
SATAII_5	[Not Detected]
		Select Item
SATAII_6	[Not Detected]
	+-	Change Option
	F1	General Help
	F9	Load Defaults
	F10	Save and Exit
	ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

OnBoard SATA Controller

Use this item to enable or disable the “OnBoard SATA Controller” feature.

SATA Operation Mode

Use this item to adjust SATA Operation Mode. The default value of this option is [IDE]. If you want to operate RAID function on SATA / SATAII HDDs, please select [RAID]. Configuration options: [AHCI], [RAID] and [IDE].

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will use the “IDE1 Master” as the example in the following instruction, which can be applied to the configurations of “IDE1 Slave” as well.

5 1