Note! For motherboards with the optional HD Audio feature, we recommend that you connect a
1.14.6Front Panel Connector (JFP1/JFP2/JFP3)
There are several external switches to monitor and control the
1.14.7ATX soft power switch (JFP1 / PWR_SW)
If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to (JFP1/PWR_SW). This connection enables you to turn your computer on and off.
1.14.8Reset (JFP1 / RESET)
Many computer cases offer the convenience of a reset button. Connect the wire for the reset button.
1.14.9HDD LED (JFP2 / HDDLED)
You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is active.
1.14.10External speaker (JFP2 / SPEAKER)
(JFP2 / SPEAKER) is a
Chapter 1 Product Introduction
23 |