AOC F19 Attaching Wall Mounting Arm, Preparing to Install An Optional Wall Mounting Arm

Page 5

Cable Connections On Back of Monitor and Computer

1.Power

2.DVI

3.Analog

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the comp port.

3.(Optional Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of t connect the other end to the computers DVI port.

4.Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does notTroubleshootidisplay an.ngimage, see

Attaching Wall Mounting Arm

Preparing to Install An Optional Wall Mounting Arm

Image 5

Contents Product Registration About This GuideNational Conventions Precautions Safety Lamp DisposalFCC Notice Weee DeclarationPrecautions Please setup or remove the base following below steps Setup the stand and baseAdjusting Viewing Angle Attaching the CablesAttaching Wall Mounting Arm Preparing to Install An Optional Wall Mounting ArmPage External Controls Setting the Optimal ResolutionOSD Settings What is DCB? DCB AdjustmentPage Page DCR Adjustment Page Eeprom Function Control IllustrationDCR How to use i-Menu software LED IndicatorsOSD DDC-CIDCR Noise Noise Phase 100Line Cool Normal Recall Normal Color Temperature from PresetPage Page Setting Extra Help Preset Display Modes SpecificationsTTL Vesa DDC2B/CIHorizontal Vertical ResolutionGND-R GND-GPlug and Play Plug & Play DDC2B Feature