AOC LM-500 user manual Adjusting the Viewing Angle

Page 8

Before You Operate the Monitor AOC LM-500

Adjusting the Viewing Angle

For optimal viewing, adjust the monitor's angle to your own preference.

•Hold the stand firmly when you change the monitor's angle.

•You can adjust the monitor's angle from -5° to 45°.

•Do not touch the LCD screen when you change the angle. It may cause damage or breakage.

•Be careful to avoid pinching your hand in the swivel base.

AOC LM-500

8

v3_123102

Image 8

Contents User’s Manual Inch TFT LCD MonitorFor Your Safety FCC StatementPrecautions General Notes Using the Right Power CordSpecial Notes on LCD Monitors Before You Operate the Monitor AOC LM-500 EPA Energy StarConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor AOC LM-500 Adjusting the Viewing Angle Operating Instructions Front Panel ButtonsAdjusting the OSD Settings Plug & Play DDC1/2B Feature How to Install INF & ICM FileTechnical Support FAQ Problem Possible SolutionError Message Possible Solution Resolution Chart Resolution Vertical Pixels FrequencySpecifications AppendixOptimal Viewing Mode 1024 x 768 x 75 Hz Factory Preset Timing Table Standard Resolution Horizontal Vertical Pixels FrequencyConnector Pin Assignment Pin Number Description