Installation Instructions Connecting The Cables

LM929

INSTALLATION INSTRUCTIONS (Cont)

Connecting The Cables

	Figure 2	Connecting Cables

1.	15-pin D-SUB Cable		2.	24-Pin DVI Cable
3.	Audio Cable		4.	AC Power Cord

Turn off your computer before performing the procedure below.

1.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.(Optional – Requires a video card with DVI port) Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port. be tightened.

3.(Optional) - Connect the PC stereo cable between the monitor's audio input and the PC's green audio output port.

4.Connect the female end of the AC power cord to the AC-in port on the back of the monitor. Connect the other end to a nearby AC-outlet.

5.Turn on your monitor and computer. If you monitor diplays an image, installation is complete. If not, refer to the FAQ (frequently asked questions) section for troubleshooting.