Drive Installation, Continued
Step 6 | Line up the holes in the brackets and the screw holes in the back of the drive. |
| The back of the bracket is shown below. |
Step 7 | Insert the screws through the screw holes and the brackets and tighten all four |
| screws. |
Step 8 |
|
After the drive is securely attached to the bracket, slide the bracket into the slot | |
| in the drive bay. |
Step 9 |
|
Tighten the thumbscrew and flip the black latch up into a vertical position. | |
|
|
12 Megaplex II Chassis Guide