AOC 917SW installation instructions Precautions

Page 3

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming poo basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a per damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monit mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliabl monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not pl on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat regist monitor in a bookcase or cabinet unless proper ventilation is provided.

The monitor should be operated only from the type of power source indicated on the label. If you are not of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This pl a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, ha install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety p grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire Never spill liquids on the monitor.

Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous vo other hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate c receptacles marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc)UL,CSAwhichlistedhave license(Only for monitors with power adapter).

Please make sure to clean the cabinet regularly with the provided cloth , you can use soft-cleanser to c instead of severe spray cleanser which will cauterize the monitor cabinet.

Dont leak liquid into monitor which will result in the damage of chassis or component. Please unplug bef

do not scratch the screen with hard things.

Image 3
Contents About This Guide National ConventionsProduct Registration HG Declaration PrecautionsFCC Notice Weee DeclarationPrecautions Adjusting Viewing Angle Setup the stand and baAttaching the Cables Attaching Wall Mounting a External Controls Setting the Optimal ResolutDCB Adjustment OSD SettingsPage Page Demo Screen divided into two for demonstration purposes DCR Adjustment Page DCR Function Control IllustrationDDC-CI LED IndicatorsFrequently Asked Questio EPA Energy Star fi SpecificationsTTL Vesa DDC2B/CISvga ResolutionHorizontal Vertical VGA