Acoustic Research AW825 important safety instructions Introduction Connecting the Speaker System

INTRODUCTION CONNECTING THE SPEAKER SYSTEM

AR’s Wireless Speaker System eliminates the hardest part of adding speakers to your home— running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker System’s RF signal travels with ease through walls, floors, ceilings and other obstacles, delivering high-

Powering the Transmitter

WIRELESS

quality sound virtually anywhere inside the house or out. With drift- and static-free reception along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR Wireless Speaker System are nearly unlimited. The AR Wireless Speaker System is compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/amps, stereos, computers, and portable devices (CD players, cassette players, MP3s etc.).

This manual covers various connection options and detailed operating instructions for making the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit

Transmitter (back panel)
	120V AC
	wall outlet
	AC Power
	Adapter
CHANNEL	DC IN
1 2 3
	R AUDIO L
	IN

Connect the small, round plug from the transmitter AC power adapter to the transmitter’s DC IN jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet.

Note: Be sure to use the AC power adapter rated 12V DC 200 mA (it has the smaller diameter plug).

INDOOR/OUTDOOR SPEAKER

www.araccessories.com.

*Range may vary according to environment.

TOUR OF THE SPEAKER SYSTEM

Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW825 for an extended period of time, unplug the transmitter AC power adapter.

Connecting to an Audio Source

Connecting to an MP3 player, CD player, or computer

MODEL AW825

INSTALLATION AND OPERATION MANUAL

Speaker

Carrying handle

Front Panel

POWER/LINKED indicator (not shown) blinks when the speaker is first powered on; it turns solid blue when the speaker is tuned to the transmitter

Rear Panel

	Y-adapter	1.	Plug the stereo plugs on the provided Y-adapter
			audio cable into the AUDIO IN jacks on the back of
	audio cable
			the transmitter (make sure to match the colors on the
			plugs and jacks).
CHANNEL DC IN	A
1 2 3		2.	Plug the mini-plug end of the provided Y-adapter into
R AUDIO L
IN
Transmitter	Audio		the headphone output of your MP3 player or CD player
(back panel)	source		(or audio output jack on your computer).

IMPORTANT INFORMATION

CAUTION	Caution: To reduce the risk of electric shock, do not remove cover (or back). No user
RISK OF ELECTRIC SHOCK.
	serviceable parts inside. Refer servicing to qualified service personnel.
DO NOT OPEN.

Important Safety Instructions

1.	Read these instructions.
2.	Keep these instructions.
3.	Heed all warnings.
4.	Follow all instructions.
5.	Clean only with dry cloth.

DC IN

L M R

Bass Boost button turns the speaker’s bass enhancement on and off

Power button turns the speaker on and off

Auto Scan button rescans for the transmitter’s signal

Volume +/– buttons adjust the volume level

Bottom Panel

L/M/R switch determines if the speaker plays sound in mono as a stand-alone speaker, or plays the left or right track in a stereo pair with an additional AW825

DC IN receives the small round end of one of the included 9V 1200mA AC power adapters; remove the protective cover to insert the adapter

Battery Compartment Cover (not shown)

remove to install 6 AA batteries

Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.

Connecting to an A/V Receiver
				1.	Plug the stereo plugs on the provided Y-adapter
	Transmitter				audio cable into the AUDIO IN jacks on the back of
	(back panel)		A/V Receiver		the transmitter (make sure to match the colors on the
1 2 3	R AUDIO L	A	Audio Output		plugs and jacks).
CHANNEL	DC IN
	IN
Y-adapter			Mini-jack to RCA	2.	Plug the mini-plug end of the provided Y-adapter into
audio cable			adapter (not included)		a mini-jack to RCA adapter (not included).

3.Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right audio outputs of your A/V receiver, amp, or other audio source.

Powering the Speaker

There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included).

6.	Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7.	Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
	produce heat.
8.	Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
	they exit from the apparatus.
9.	Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
	way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
	apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Care and Maintenance

•Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface.

•Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.

•If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage.

•Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).

Transmitter

Top panel

SIGNAL POWER

CHANNEL	DC IN
1 2 3

R AUDIO L

IN

SIGNAL indicator lights green when the audio is present and the transmitter is broadcasting

POWER indicator lights when the transmitter is on

CHANNEL 1 2 3 lets you find the best transmission frequency for your environment

DC IN jack receives the small round end of the included 12V 200mA AC power adapter

AUDIO IN (R / L) connects to your sound source using one of the connection options shown here

CHANNEL	DC IN		AC Power Adapters
1 2 3			1.	Insert the small, round plug from the speaker AC
	R AUDIO L
	IN
				power adapter into the DC IN jack on the bottom of
				the speaker.
	AC power	120V AC	2.	Plug the other end of the speaker AC power adapter
	adapter	wall outlet
				into any standard 120V AC wall outlet.

Note: Be sure to use the speaker AC power adapter rated 9V DC 1200 mA.

Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet environments, such as rain, mist, dew, etc. In other words, you can take it out, just don’t leave it out. To avoid electrical shock, use this product with caution near water sources if powered with the AC adapter. Never submerge in water.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.

Model No.:______________________________________________________________________________________________

Purchase Date:__________________________________________________________________________________________

Dealer/Address/Phone:___________________________________________________________________________________

Back panel

Included Accessories

Note: These power units should be plugged in so that they stay vertical or lie flat.

3.5mm to RCA cable	Speaker AC/DC 9V	Transmitter AC/DC 12V
	1200mA adapter	200mA adapter

AA Batteries

1.Remove the battery compartment cover on the bottom of the speaker.

2.Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment.

3.Replace the battery compartment cover on the bottom of the speaker.

Note: Place the rubber cap in the speaker power input jack when using batteries.

DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.