Sanyo PLC-WXL46 Safety Instructions Air Circulation, Installing the Projector in Proper Position

Page 6

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–  Do not put any flammable objects or spray can near the projector. Hot air is exhausted from the air vents.

–  Keep the exhaust vent at least 3’ (1 m) away from any objects.

–  Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.

–  Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fan’s running speed is changed according to the temperature inside the projector.

Exhaust Vent (Hot air exhaust)

Exhaust Vent

Air Intake

(Hot air exhaust)

Vent

Air Intake

Vent

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.

Do not roll the projector more than 20 degrees from side to side.

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

Do not pitch the projector more than 20 degrees backward and forward.

CAUTION

Choose the running speed of cooling fans in the fan control setting according to the altitude in which the projector is being used (p.49). Failure to do so may affect the projector life.

Moving the Projector

When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case.

Handle the projector carefully; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

–  Do not drop or bump the projector, otherwise damages or malfunctions may result.

–  When carrying the projector, use a suitable carrying case.

–  Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–  Do not put the projector in a case before it is cooled enough.

Image 6
Contents Model PLC-WXL46 Network SupportedFeatures and Design NoteTable of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord Requirement ComplianceFederal Communications Commission Notice Part Names and Functions ④ Exhaust VentsPart Names and Functions Rear Terminal ③ LAN Connection TerminalPart Names and Functions Top Control Part Names and Functions Remote Control Part Names and Functions Remote Control Battery Installation Operating RangeInstallation Adjustable FeetPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio VideoInstallation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Top Control Menu button Point buttonsBasic Operation Menu Bar For computer sourceFor video source Keystone Correction Basic Operation Focus AdjustmentRemote Control Top ControlCOMPUTER/VIDEO button Basic Operation Sound AdjustmentRemote Control Operation Freeze buttonBasic Operation Input Menu Computer InputInput Source Selection Source Select MenuPC System Menu Computer Input Computer System SelectionAuto ModeTo store the adjusted parameters Computer Input Auto PC AdjustmentDirect Operation Remote Control PC Adjust MenuComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Computer Input Image Level Adjustment True Screen Size AdjustmentNormal FullCustom For zooming in and out the images Digital zoom +Digital zoom Input Source Selection Video, S-video Remote Control Menu OperationVideo Input Source Select Menu VideoPointer to Computer 1 and then press the Select Component Auto Video Input Video System SelectionVideo or S-video Auto AV System Menu Video or S-videoVideo Input Image Level Selection CinemaVideo Input Image Level Adjustment ColorTint Video Input Noise reductionProgressive Wide Video Input Screen Size AdjustmentZoom Natural wideSetting SettingLoo select SettinLoo Loo and Loo PIN code lock settins CaptureLoo PIN code lock Enter a Loo PIN codeChane the Loo PIN code Loo PIN code lock Loo PIN code lock Dialo BoxScreen aspect CeilingRear TerminalStandby mode Power managementOn start To change the code for the remote controlOn start Remote control Lamp controlSecurity Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock setting Change the PIN codeChange the PIN code Lamp counter FanFan control Filter counterWarnin lo Factory defaultClosed Caption Factory default Closed CaptionMaintenance and Cleaning Note Then check the matters belowMaintenance and Cleaning Cleaning the Air Filters Resetting the Filter CounterMaintenance and Cleaning Attaching the Lens Cover Cleaning the Projection LensCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Reset the lamp replacement counterLamp Handling Precautions Maintenance and Cleaning Lamp Replacement CounterTroubleshooting AppendixAppendix Indicator blinks or lights Projector Condition seeComputer Input/Video Input Appendix Menu TreeSound Computer InputVideo Input Setting System AutoSettingAppendix Indicators and Projector Condition Projector ConditionAppendix Compatible Computer Specifications DisplayTechnical Specifications Dimensions AccessoriesOptional Parts Appendix PJ Link Notice Appendix Configurations of Terminals Service Port Connector Terminal Mini DIN 8-PINAppendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No KM5AZ
Related manuals
Manual 68 pages 8.61 Kb

PLC-WXL46 specifications

The Sanyo PLC-WXL46 is a versatile and high-performance LCD projector designed to meet the diverse needs of classrooms, boardrooms, and small to medium-sized venues. This projector is renowned for its impressive image quality, portability, and ease of use, making it an ideal choice for educators and business professionals alike.

One of the standout features of the PLC-WXL46 is its WXGA resolution of 1280 x 800 pixels. This resolution ensures that presentations are displayed with sharp, clear images and vibrant colors. The projector has a brightness of 3,000 lumens, making it suitable for environments with varying lighting conditions. Even in well-lit rooms, the images remain clear and visible, allowing for effective presentations without the need to dim the lights.

The Sanyo PLC-WXL46 employs advanced technologies to enhance its performance. It utilizes a 3LCD system, which ensures uniform color and brightness by using three separate LCD panels for red, green, and blue. This technology delivers stunning color accuracy and eliminates the rainbow effect found in some DLP projectors. Additionally, the projector incorporates a high-quality lens with a 1.5x optical zoom capability, providing flexibility in placement and image size adjustments.

Portability is another significant advantage of the PLC-WXL46. Weighing just under 6 pounds, it is easy to transport between locations. The projector is equipped with a variety of input options, including HDMI, VGA, and composite connections, allowing users to connect it to multiple devices such as laptops, DVD players, and gaming consoles. This versatility makes it an excellent choice for multimedia presentations.

Durability and reliability are also hallmarks of the Sanyo PLC-WXL46. The projector features a long lamp life of up to 5,000 hours in eco mode, which reduces maintenance costs and downtime. The added ability to filter dust with the built-in filter system enhances longevity, ensuring that the projector maintains its performance over time.

In conclusion, the Sanyo PLC-WXL46 is a robust and efficient projector that excels in delivering high-quality images in a portable format. Its combination of WXGA resolution, 3LCD technology, versatile connectivity options, and durable design makes it a valuable tool for educators and professionals seeking to make an impactful impression with their presentations. With the PLC-WXL46, users can expect nothing less than a superior viewing experience.