AOC 2217PWC user manual Attaching the Cables, Cable Connections On Back of Monitor and Computer

Page 5

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Attaching the Cables

Cable Connections On Back of Monitor and Computer

1.Power

2.Audio

3.DVI

4.Analog

5.USB up

6.USB down x 3

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.

3.Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.

Image 5

Contents About This Guide PrefaceNational Conventions Product RegistrationHG Declaration Safety IntroductionSetup the stand and base SetupAdjusting Viewing Angle Cable Connections On Back of Monitor and Computer Attaching the CablesAttaching Wall Mounting Arm Setting the Optimal Resolution Using the MonitorClick Settings Click Control Panel Click SettingsOperation Steps What is DCB? OSD SettingsDCB Adjustment How to use Color Boost? Page Page How to use Picture Boost? How to Use DCR? DCR AdjustmentWhat is DCR? Function Control Illustration DCR DemosDCR Drivers LED IndicatorsStatus LED Color Camera SoftwareWindows XP Windows MEWindows Vista Frequently Asked QuestionsTechnical Support Product Information SpecificationsFREQUENCYkHZ FREQUENCYHz Preset Display ModesPin Assignments Pin Number Pin Side of the Signal CablePin No Signal Name Plug & Play DDC2B Feature Warranty StatementWarranty Statement Plug and Play