Calibre UK 6ID Technical Information Panel Specification, Signal compatibility, Power requirement

Technical Information

Panel Specification:

Viewable image size 16.1cm/6.3" nominal. Panel resolution 1024x768.

Colour depth 6 bits per colour, 18-bits total. Viewing angles 60deg L/R//D, 45deg U typical. Panel brightness 250cd/m2 typical,

Panel contrast ratio 300:1 typical.

Signal compatibility:

Input 1 – computer RGB via 15HDD socket. 640x350 up to 1280x1024, 50-75Hz refresh, non-interlaced. (Note: 1280x1024 support is via image downscaling to fit the 1024x768 resolution panel. There may be a slight loss of image quality in downscale mode.)

Syncs: separate TTL/5V positive or negative, negative combined sync TTL level, or negative sync on green consisting of 0.3V sync and 0.7V video.

Input 2 – composite video via BNC

PAL, NTSC or SECAM, automatic standards detection. Pro Video model has automatic enhanced-bandwidth monochrome mode.

Input 3 – YC/S-Video via 4-pin Mini-DIN

PAL, NTSC or SECAM, automatic standards detection.

Input 4 – Pro Video Option Only

RGB or YUV component video via 3 or 4 BNCs.

Input 5 – Pro Video with SDI Option Only SDI Serial Digital Video via BNC.

Input 6 – DVI Option Only

DVI Digital Visual Interface, DDC2B compatible for connection to DVI compatible graphics cards.

Touchscreen option:

Resistive touchscreen with RS232 serial controller available to special order.

Power requirement:

12VDC at approximately 25W (TBC).

An optional mains PSU is available.

Other power options available to order include ground isolated 12VDC, 24VDC and, 28VDC with optional industrial or military grade power filtering. These options may be subject to MOQs.

Model numbers:

16XLCD16 xx NSC

-01 = VGA analogue only -02 = VGA analogue + DVI

-03 = VGA analogue & Std Video -04 = 03 + DVI

-05 = VGA analogue & Pro Video -06 = 05 + DVI

-09 = 05 + SDI Video

-10 = 05 + DVI + SDI Video -11 = Standard video only -13 = Professional video only -14 = Pro Video + SDI

Dimensions and Weights:

Metal cased models

Size TBA excluding connectors

Unit weight TBA , Shipping weight TBA Kg

Open chassis models

Size TBA mm

Unit weight approx 1.5Kg, Shipping weight TBA

Calibre UK Ltd

Cornwall House,

Cornwall Terrace,

Bradford, West Yorkshire

BD8 7JS, England

Tel	+44 (0)1274 394125
Fax	+44 (0)1274 730960
E-mail	sales@calibreuk.com
Web-site	www.calibreuk.com

Issue 1.31 E&OE specifications subject to change without notice 10/12/07 All trademarks acknowledged.