Centurion 531 warranty Installing the Motherboard, Install add-on card

Page 3

Centurion 531

English

Installing the Motherboard

1. Remove the side casing.

2. Lie down the casing.

3. Aiming at the holes on the PCB, and secure the alumnus post with screws.

4. Align the holes of PCB and casing. Secure them by fastening screws on the PCB.

Install add-on card

1.Press to loosen the latch on the inner casing.

2.Insert the add-on card.

1. Lock the latch back from the outside of the casing.

Installing Drives (CD-ROM, FDD and HDD)

After removing the side casing on both sides, manually loosen the latch of the panel card inside the casing, and you may remove the panel card.

3

Image 3
Contents Warranty Information SpecificationsProduct Overview Specification & Parts list InstallationRemoving side panels Installing the Motherboard Install add-on cardInstalling Drives CD-ROM, FDD and HDD Remove side casing Installing the power deviceReplacing/Installing the Case Fan Mother Board Function Panel Installation Guide