Conceptronic C300BRS4A user manual Dynamic IP Parameters Description Host Name, MAC Address button

Conceptronic C300BRS4A 802.11n Wireless Broadband Router

7.The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and reboot the Router, click on the Tools button in the top menu and select the System button in the left menu. In the System Management window, click the Save button under Save Settings to Local Hard Drive and then click the Reboot button to reboot the C300BRS4A.

8.The Router will save the new settings and restart. Upon restarting, the Router will automatically establish the WAN connection.

Additional settings for Dynamic IP Address connections:

Dynamic IP Parameters	Description
Host Name	This is not always necessary, but may be required for some ISPs. Type
	in the MAC address of your computer’s Ethernet adapter in the MAC
	Address field and click the Clone MAC Address button. This will copy
	the information to a file used by the Router to present to the ISP’s
	server used for DHCP. Some ISPs record the unique MAC address of
	your computer’s Ethernet adapter when you first access their network.
	If you want to later replace the cloned MAC address with the factory
	default setting, type in all zeros – 0:0:0:0:0:0 – and click the Clone
	MAC Address button.
MAC Address	This is not always necessary, but may be required for some ISPs. Type
	in the MAC address of your computer’s Ethernet adapter in the Cloned
	MAC Address field and click the Clone MAC Address button. This will
	copy the information to a file used by the Router to present to the
	ISP’s server used for DHCP. Some ISPs record the unique MAC address
	of your computer’s Ethernet adapter when you first access their
	network. If you want to later replace the cloned MAC address with the
	factory default setting, type in all zeros – 0:0:0:0:0:0 – and click the
	Clone MAC Address button.
Clone MAC Address	To clone the MAC address of your computer’s Ethernet adapter, type
	in the MAC address in the MAC Address field and then click this Clone
	MAC Address button.
Primary DNS Address	Enter the Primary DNS Address. This information should be provided to
	you by your Internet Service Provider.
Secondary DNS Address	The Secondary DNS Address is optional. See your Internet Service
	Provider for further information.
MTU	The Maximum Transmission Unit size may be changed if you want to
	optimize efficiency for uploading data through the WAN interface. The
	default setting (1500 bytes) should be suitable for most users. Some
	user may want to adjust the setting to optimize performance for
	wireless traffic or when low latency is desired (such as with Internet
	gaming). It is highly recommended that the user research how
	adjusting the MTU may affect network traffic for better or worse.

37