Husqvarna PP 418 manuel dutilisation Engine Maintenance

Page 14

ENGINE MAINTENANCE

Engine Oil

Checking, Adding and Changing Oil

Always check the oil level before starting the engine.

Keep oil level at FULL. Do not overfill. Check level daily, or after every eight (8) hours of use.

Note: Engine holds approximately 1.4 liters (1.5 quart) when changing oil and oil filter.

Always place the Power Pack on a level surface when check- ing and changing the oil

Changing the Oil and Filter

Change oil after the first 5 to 8 hours of use. Thereafter every 50 hours .

Follow the recommendations on page 8 as well as in the BRIGGS & STRATTON Operator’s Manual.

ENGINE OIL DRAIN

Replace oil every 50 hours.

Change Oil Filter after every 100 hours

We strongly recommend to only use the BRIGGS & STRATTON original replacement parts

OIL FILTER ACCESS

Remove the 6 screws as indicated below. This will enable full access to the engine oil filter.

OIL FILTER

Replace every 100 hours.

NOTICE

Used oil is a hazardous waste product. Dispose of used oil properly. Do not discard with household waste. Check with your local authorities, service center, or dealer for safe disposal/recycling facility.

1.With engine OFF but still warm, remove oil drain plug and drain oil into appropriate receptacle and remove the oil filter.

2.Before installing new filter, lightly oil filter gasket

with fresh, clean oil.

3.Screw filter on by hand until gasket contacts oil filter adapter. Tighten 1/2 to 3/4 turn more.

4.First add 1 liter (1 quart) of any of the specified oil qualities.

5.Start and run engine for 30 seconds.

6.Stop engine. Re-check oil level – Top off as necessary

– typically 0.3 - 0.5 liter (12 - 16 oz).

Oil Pressure

-If the oil pressure drops below 0.1-0.2 kg/cm (1-4 psi), an oil pressure switch will stop the engine.

-If oil level is below the ADD mark on dipstick, add oil to bring level to FULL mark. Try to start the engine.

-If this does not correct the problem contact an authorized BRIGGS & STRATTON service dealer.

AIR FILTER

Your engine will not run properly using a dirty air filter. Inspect and service the air cleaner at each oil change - every 50 hours.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. Also - inspect the spark arrester screen for carbon deposits. A partially plugged screen will cause loss of power. It is recom- mended to inspect the screen at each oil change.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, re- placement is required. We recommend to replace the fuel filter every 250 hours

ADDITIONAL ENGINE INFORMATION

Please see the BRIGGS & STRATTON Operator’s Manual for additional information about servicing the engine.

The manual also has specific information about specifications, tune-up parts, engine warranty, emission compliance, etc.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Personal Safety Equipment IntroductionRegister the Product Safety DefinitionsSafety Hazards Contents Lifting and LoadingSerial number What is WhatEngine model, type and code Lifting eyeletDecals and Locations Hydraulic valve What Tools can be PoweredHydraulic Hoses and Couplers Flow RequirementOIL Handling Fuel HandlingProper Fuel Engine OILAssembly Only use the lifting eyelet when lifting the power pack StepDisconnecting a Battery Servicing the BatteryConnecting a Battery Charging a BatteryControls Operation Ignition SwitchPlease see Adjusting the Automatic Throttle on Throttle ControlStarting the First Time Starting ChecklistStarting Procedure Before startingGeneral Description Adjusting the Automatic ThrottleAdjustment ScenarioEngine Maintenance Hydraulic Maintenance Technical Specifications HydraulicsWarranty Husqvarna Equipment WarrantyConformity Certificates Page 510 02
Related manuals
Manual 20 pages 44.94 Kb

PP 418 specifications

The Husqvarna PP 418 is a versatile and powerful pole saw designed specifically to tackle various pruning and cutting tasks with ease and efficiency. Tailored for both homeowners and professionals alike, the PP 418 combines an array of innovative technologies and features that enhance its usability and performance.

One of the standout characteristics of the Husqvarna PP 418 is its lightweight design, which allows users to maneuver it effortlessly during extended periods of use. This feature is advantageous for homeowners with larger gardens or for professionals who often find themselves working in different locations. The telescopic shaft can be extended, increasing its reach and enabling users to access high branches without the need for a ladder.

Powering the PP 418 is a robust gas engine that provides a perfect balance of power and efficiency. This ensures that users can efficiently cut through thick branches and limbs without experiencing the fatigue associated with weaker saws. The engine is engineered to offer outstanding torque, allowing for smooth operation even under heavy load conditions.

Safety is another priority in the design of the Husqvarna PP 418. It features a protective hood that shields the operator from falling debris while working. Additionally, the ergonomic handle is designed to provide a secure grip, reducing the risk of accidents during operation. The weight distribution of the tool has been carefully considered to minimize strain on the user's arms and back.

Husqvarna's unique LowVib® technology is incorporated into the PP 418, which significantly reduces vibrations experienced during operation. This added feature not only enhances comfort but also helps to prevent long-term health issues associated with prolonged exposure to vibrations.

Another notable feature of this pole saw is the easy-to-use chain tensioning system, which allows users to adjust the chain tension quickly without the need for additional tools. This is particularly beneficial for maximizing efficiency and maintaining optimal performance throughout the workday.

Moreover, the Husqvarna PP 418 is equipped with a quality cutting bar and chain that ensures clean cuts every time. The durable materials used in its construction promote longevity, making it a worthwhile investment for both casual users and professionals who require reliability in their equipment.

Combining innovative features, outstanding power, and user-friendly design, the Husqvarna PP 418 stands out as an excellent choice for anyone looking to maintain their trees and shrubs efficiently and safely.
Top Page Image Contents