VII. Safety & FAQ
This chapter provides some basic troubleshooting when you encounter problems installing or using the camera. It is important that you read first the previous chapters and the bundled software documentation before starting to find the problem. If this manual was not able to fix your problem, please contact the dealer or manufacturer for customer support.
7.1 General Maintenance and Safety
Following are some troubleshooting tips regarding 
Eye hardware problems:
1.Avoid exposing the camera to moisture and extreme temperature.
2.Do not touch the lens with your finger.
3.Do not put things on top of it or apply pressure on it.
4.Clean the camera using a clean, dry cloth. Do not use harsh or abrasive solvents or cleaners.
5.When cleaning the lens, use a soft,
6.Do not try to pull or twist the cable of the camera as this might damage it.
7.Do not disassemble or try to touch the inside of the camera. This will void the warranty of your camera and may damage it consequently.
8.Store camera in a clean and dry place.
18
Eye Introduction
I.Parts of Ken-A-Vision M
Eye
Snap Button | Power ON/OFF Button | Flash Mode | ||
|
|
|
| Button |
|
|
|
| Flash |
|
|
|
| Flash Mode |
Lens |
|
|
| LED |
|
|
| ||
Microphone | Focusing Ring |
Power On/Off LED
Indicator
View Finder
USB Connector
Speaker
3