BIOS: | AMI BIOS; |
| Supports “Plug and Play”; |
| ACPI 1.1 compliance wake up events; |
| Supports jumperfree; |
| SMBIOS 2.3.1 support; |
| CPU frequency stepless control |
| (only for advanced users’ reference, see CAUTION 4) |
OS: | Microsoft® Windows® 98SE / ME / 2000 / XP compliant |
CAUTION!
1.If the CPU is overheated, please check if the CPU fan on the motherboard functions properly before you resume the system. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
2.Do NOT use a 3.3V AGP card on the AGP slot of P4VT8 motherboard! It may cause permanent damage!
3.Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1/2000 SP4. It may not work properly under Microsoft® Windows® 98/ME. Please refer to Microsoft® official document at http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
4.Although P4VT8 offers stepless control, it is not recommended to perform over clocking. When the CPU frequency of P4VT8 is set to perform over clocking, other clocks, such as PCI clock, AGP clock, and Memory clock will also be overclocked proportionally. Frequencies other than the recom mended CPU bus frequencies may cause the instability of the system or damage the CPU and the motherboard.
6