![](/images/new-backgrounds/1263740/26374021x1.webp)
5.1 – Keyspan Serial Assistant
Port Mapping Tab
The Port Mapping tab in the Keyspan Serial Assistant allows you to change how COM port numbers are assigned to your Keyspan adapter. The following is an explanation of the item in this tab.
Important!!! Please make sure you read this entire section. Changing COM port assignments may render other hardware unusable.
The COM Port List box shows any connected Keyspan USB
Enable or check the Show All COM Assignments check box to display ALL of the COM port name and numbers that have been registered on your computer. This will include COM ports for other devices.
Note: You may have COM ports assigned or ‘set aside’ for hardware that may not be installed on your computer depending on how your computer was setup by its manufacturer.
The COM port mapping pull down menu allows you to reassign the selected Keyspan COM port in the COM port list window. This window also reports whether a COM port is ‘in use’. In this menu, ‘In use’ means that the selected COM port has been assigned or reserved. It is highly recommended that you only change the COM port mapping to COM ports that are not ‘in use’.
Note: The Com port mapping pull down menu allows you to change the COM port mapping to any COM port including those that have already been assigned (aka in use). Changing the COM port mapping to a COM port that is in use may render any hardware and/or software using that port inoperable.
11