Pandigital PRD06E20WWH8, V4.5 SettingsCalibrate Touch Screen, SettingsNetwork, Turn Wi-Fi Off

Settings>Calibrate Touch Screen

If you notice that the touch screen is not responding accurately, you may need to re-calibrate the touch screen sensors.

1.Select Settings from the Application Quick Launch Bar,  tap Calibrate.

2.Tap Calibrate to perform the calibration.

3.When the pop-up windows appear, use a pointed device to accurately tap the “+” in the designated spots on the screen.

4.If calibration is successful, you can resume normal use. If unsuccessful, repeat the calibration again.

Settings>Network

In order to connect to the Internet, you must have a Wi-Fi network set up on your pandigit al no vel.

1.Select Settings from the Application Quick Launch Bar,  tap Network.

2.The device scans and lists all local Wi-Fi Networks found. A indicates secure networks that require login name/password to connect.

3.Tap the desired network to which you want to connect,  enter the Network Password if applicable.

4.Tap to close the Settings screen.

If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap Other and then enter the network name and key,  tap Save.

(Advanced): After saving the Wi-Fi network, you can change your network settings by selecting Manual Setup, and then follow the prompts.

Connecting to Public Wi-Fi Hotspot

If you are connecting via a public Wi-Fi hotspot, it may be necessary to immediately launch the browser and provide the hotspot login information prior to having an active internet connection.

1.Follow steps 1-5 above to select the hotspot Wi-Fi network.

2.Select Web from the Application Quick Launch Bar.

3.Enter the login information as required by the hotspot.

Turn Wi-Fi Off

There may be times when you want to prevent your device from connecting to a Wi-Fi network, even if you’ve set the network up on your device.

39