Netopia 3347W, 3357W-ENT manual FCC Part 68 Information, FCC Requirements, FCC Statements

Page 43

Technical Specifications and Safety Information A-5

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak.

FCC Part 68 Information

FCC Requirements

1.The Federal Communications Commission (FCC) has established Rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones.

2.If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service.

3.The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. You will be advised of your right to file a complaint with the FCC.

4.If the telephone company requests information on what equipment is connected to their lines, inform them of:

a.The telephone number to which this unit is connected.

b.The ringer equivalence number. [0.XB]

c.The USOC jack required. [RJ11C]

d.The FCC Registration Number. [XXXUSA-XXXXX-XX-E]

Items (b) and (d) are indicated on the label. The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the REN's of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly.

FCC Statements

a)This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

b)List all applicable certification jack Universal Service Order Codes (“USOC”) for the equipment: RJ11.

c)A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

Image 43
Contents Page Part Number Contents Getting Started Guide Introduction Features and CapabilitiesOverview Getting Started Guide How to Use this GuideFind a Location Making the Physical ConnectionsWhat You Need Power Supply Installation Important Safety InstructionsDSL port Ethernet Power port Ports Identify the Connectors and Attach the CablesConnect your computer, DSL line, and power source as shown LAN 1, 2, 3 Netopia 3347W/3357W-ENT Adsl Wireless Router Status LightsGetting Started Guide Readying Computers on Your Local Network Connecting to Your Local Area NetworkConnecting to an Ethernet Network Macintosh Macintosh PC Ethernet Switch Netopia 3347W/3357W-ENT in an 802.11b wireless network Configuring TCP/IP on Windows-based Computers Configuring TCP/IPMicrosoft Windows Some Windows versions follow a path like this Macintosh MacOS 8 or higher or Mac OS Configuring TCP/IP on Macintosh ComputersClose and Save, if prompted Telnet-Based Management Configuring Telnet software Connecting through a Telnet SessionNavigating through the Telnet Screens Getting Started Guide Easy Setup Telnet Screens Easy SetupAccessing the Easy Setup Telnet screens LLC Snap Quick Easy Setup Connection PathEasy Setup DSL Line Configuration Easy Setup Profile IP Easy Setup Easy Setup Easy Setup Security Configuration Wireless Configuration Wireless LAN ConfigurationSsid Wireless LAN Configuration Channel Closed System Open Enable WEP Default Key +--------+ Bit9a82ff3d92 Cancel Continue Environment Technical Specifications and Safety InformationPower requirements DescriptionRegulatory notices Agency approvalsDeclaration for Canadian users Manufacturer’s Declaration of ConformanceAustralian Safety Information FCC Requirements FCC Part 68 InformationFCC Statements Electrical Safety Advisory