Musical Fidelity V-PSUII specifications Introduction, Installation Precautions, Connections

V-PSUIIPower Supply Unit

Instructions

Connections

All connections must be made before the mains adaptor is plugged in, and before any amplifier connected is switched on. Always switch off the V-PSUII(and connected amplifiers etc) before connecting/disconnecting power, or changing leads.

Power Inputs

Using figure-8 moulded mains lead (supplied), connect the

V-PSUIIto a mains socket.

Power Outputs

Using 1.3mm DC plug to plug lead(s) (supplied), connect the V-PSUII12VDC OUTPUTS to the V-series units as required.

Use

Connect up the V-series components audio inputs and outputs as required.

Switch on the V-PSUIIusing the rocker switch next to the mains input socket.

The three individual output LEDs should light indicating presence of power at the respective output.

Switch on attached components (amplifiers etc).

Turn the volume on amplifier to normal listening levels, sit back and enjoy the music.

These products have been designed so that it may be left on indefinitely, but please note that the V-PSUIImay become warm to the touch - this is normal.

Note: The V-PSUIIcan also be used to power older V-series components.

	This product has been tested to ensure that
Introduction	its operation is not adversely affected by
Thank you for purchasing the V-PSUIIpower	normal background levels of Radio
supply unit. We sincerely hope that it will	Frequency Interference (R.F.I.), and that it
bring you many years of outstanding	does not itself generate excessive amounts
listening pleasure.	of interference. However, if a problem
	persists, please contact your Musical Fidelity
Installation Precautions	agent.
Your new V-PSUIIis designed and built to	Never	open	the case of the	V-PSUII
provide trouble-free performance, but as with	yourself, as this will invalidate the guarantee.
all electronic devices, it is necessary to	Place all connecting cables where they are
observe a few precautions:	not likely to be walked on or trapped by
Do not use the V-PSUIInear water. The unit	items placed on them.
must not be exposed to dripping or splashing	The V-PSUII		will operate in accordance with
and no objects filled with liquids, such as	its specifications within the following
vases, must be placed on the unit.	environmental range:
Keep the V-PSUIIaway from heat such as	Temperature 5 to 45 degrees Celsius
radiators. No naked flame sources, such as
lighted candles, should be placed on the	Humidity 10 to 90% non condensing
unit.
	There	are	no user adjustments	inside.

Please refer all service work to an authorised Musical Fidelity agent.

Front and back connections

Power output sockets and indicator LEDs

Power switch

Power input socket