Monarch® 9855®RFMPTM Multi-Protocol RFID Printer/Encoder
Versatile RFID
The Monarch 9855RFMP printer/ encoder is compatible with a full range of inlays to complement your specific application, including inlays from:
•Avery Dennison
•Alien Technology
•KSW
•Raflatac
•RF Identics
•More!
We won’t approve an inlay until it meets Avery Dennison’s exacting yield standards!
This versatile printer/encoder also supports 1 inch feed lengths and features full 1D and 2D bar code print capability on RFID labels.
Compliant RFID
The Monarch 9855RFMP meets OSHA requirements for use
in a workplace and is FCC certified, RoHS compliant and certified for use in over 40 countries. In addition, Avery Dennison’s printer and supply manufacturing processes are
Connected
RFID
Our innovative Dual Wireless 802.11b/g/Wired Ethernet network interface card option allows you to run your printers on a wireless network, with the ability to change to a wired connection. Automatically switch from wireless to the wired ethernet port while retaining the
IP address and without losing the session, enhancing your productivity.
Features and Specs at a Glance
•Encodes UHF Chips
•Prints Bar Code Data
•Prints Tags or Labels
•Thermal Direct or Transfer
•Knife Option
•Prints up to 12 ips
•Optional 300 dpi Printing
•Dual Wired/Wireless Ethernet Available
Dimensions: Height – 13.0” (330 mm); Width
–12.5” (318 mm); Depth – 17.3” (439 mm) Weight – 29 lbs. (13.2 kg)
Printing Method: Thermal Direct and Thermal Transfer
Printhead: 4.0” (102 mm/812 dots); 203 dots/inch (8 dots/mm) OR 300 dots/inch (11.8 dots/mm. Both printheads provide enhanced print quality
Operator Interface:
RFID Protocols: EPC Gen 2 and EM 4122
Memory: 4MB Flash, 16 MB SDRAM Optional 16MB; Configurable 8 MB RAM using these buffers: Transmit, Receive, Image, Format, Downloadable & Scalable Fonts
Bar Code Types: UPCA +2/+5, UPCE +2/+5, EAN8 +2/+5, EAN13 +2/+5, Interleaved 2 of 5, Extended Code 39, Codabar (NW7), Code 128, Code 93, MSI, PDF417, Postnet, MaxiCode, Code 16K, Quick Response (QR Code); Aztec
Standard Fonts: Bitmap- Standard, Reduced, Bold,
Font Magnification: 1x to 7x 4 to 250 pt. for scalable/TrueType fonts
XML-enabled printers are currently unavailable.
Monarch® Supplies: For smooth and reliable performance, only Monarch supplies are recommended for use with Monarch printers. Our labels scan virtually 100% of the time, cutting wasted rescanning and labeling time.
Monarch® Service: Every Monarch printer is fully supported by Monarch Service, the largest net- work of experienced,
Avery Dennison Printer Systems Division
170 Monarch Lane Miamisburg, OH 45342
1.800.543.6650
©2008 Avery Dennison Corporation. All rights reserved. Printed in U.S.A.