Mitel 3300, T7406 manual Telephone Setup, To set your phone ID number

Telephone Setup

Each T7406 phone must be registered to a base by sharing an identical security code. A base can support up to three independent phones. Each phone assigned to a base station must have a unique Set ID (1, 2 or 3). When viewing the back of the base station, the TCM/RJ-11 jacks from left to right correspond to the handset ID # 1, 2, and 3.

To set your phone ID number

1.Press the Options button.

2.Press the SHOW softkey.

3.Press the NEXT softkey until the display shows "6. Handset ID".

4.Press the SHOW softkey. The display shows the current phone ID number.

5.To change the phone ID number, press the CHANGE softkey. The display shows "Enter Password".

6.Enter the 6-digit password (default is 000000).

7.Press the OK softkey. The display shows "Press Digit 1-3".

8.Press the dial pad number corresponding to your phone ID number.

9.Press the OK softkey to save the phone ID number.

Note: Talk to your Administrator for information on changing your password.

-7-