Features and Specifications, Power Supply

Users Manual & Installation Guide

PV- SERIES: Power supply module with UPS and SSD Flash

FEATURES AND SPECIFICATIONS

Power Supply

•Output power capability:

•Input voltage:

•Output voltage:

•Line regulation(+5V)

•Load regulation(+5V)

•Load regulation(+12V)

•Load regulation(-12V)

•Ripple/noise:

•LED indicators:

Battery charger

•Supported battery-type:

•Charging method:

•Charging current:

•LED indicators:

•

UPS

•Alarm outputs:

•Interrupt support:

•Automatic shut down:

•CPU controlled shut down:

SSD

•Disk capacity:

•Speed:

•

Physical / Environment

•Dimensions:

•Temperature range:

•Humidity:

•Connectors

•

30W(max)

8-30 VDC or

16-30 VDC using battery charger for 12V battery +5V @5A (max)

+12V @250mA(max) -12V @100mA(max)

0.3% -	@low line to high line; full load
0.6%	- @no load to full load; nominal input
1% -	@no load to full load; nominal input
0.5% -	@no load to full load; nominal input

150mV p-p; DC–20MHz

Green LED indicating presence of +5V Green LED indicating presence of +12V Green LED indicating presence of -12V Green LED indicating Mains>16V

12V lead-acid, min. 4AH

Constant current / constant voltage 400mA

Yellow LED indicating “Battery full” Red LED indicating “Battery low”

“Mains failure” alarm interrupt “Battery low” alarm interrupt

INT 5,7,9,10,11,12,15 – programmable

120 sec after detection of both: “Mains failure” and “Battery low”

Controlled by user-software, delayed up to 127 sec.

PV-5122: 1.76 MB

PV-5124: 3.84 MB

PV5122: Read 170 KB/sec, write 20 KB/sec

PV5124: Read 90 KB/sec, write 15 KB/sec

96x90x18mm Operating: -20°C to 70°C Storage: -40°C to +85°C

0to 90% RH, non-condensing PC/104 Stack-through connectors Screw terminals for mains and 12V battery

Page 3 of 8