MicroBoards Technology Print Factory user manual

Page 29

Microboards Technology

Print Factory

4)Change the Outer diameter to 70 and the inner diameter to 38. If you have the resolution set to

.1mm, the outer diameter will be 700 and the inner diameter will be 380.

5)Uncheck the Print on hub checkbox.

6)Click on the Apply box.

7)Click OK.

8)The printer is now ready for use with the Verbatim Vinyl CD-R discs.

9)When you want to go back to printing on standard CD-R discs, you will need to change the inner and outer diameters back to the default values. The default outer diameter is 118 and the default inner diameter is 36. Again, if you are in the .1mm resolution, the numbers would be 1180 and 360.

Image 29

Contents Print Factory Microboards Technology Print Factory Table of Contents Fully Integrated Automation IntroductionWhat’s Included Front Panel Indicators and ButtonsPrinter Description Installing Ink Cartridges InstallationSupported Ink Cartridges Loading / Replacing Ink CartridgesConnecting to a Computer Installing Disc Guide and Output BinParallel Port USB PortUSB Port and Parallel Port Installing the Printer DriverWindows 2000 install procedures Page Page Windows XP install procedures Page Page Multiple Printers Installing Surething CD Labeler Software Page Page Page Page Print Test Disc Using the PrinterAlignment Align Disc Page Loading Discs Printing Discs Page Page Page Printing on Verbatim Vinyl CD-R discs Page Printing Recommendations Setup TabPrinter Properties Page Page Features Tab Utility Tab Color TabPrint test CD Print Alignment CD Clean Cartridge Ink Level Disk Loading error Solve a ProblemPrinter not printing Out of Paper indicationLow Ink indication Product SpecificationsContact Information