Marshall electronic operating instructions Connecting to the NCB-1004, Overview

Page 7

Connecting to the NCB-1004

Overview

The NCB-1004 can be operated by any computer with a web browser, via a TCP/IP network connection. No additional software is needed. The NCB-1004 may be connected directly to a single computer, or connected to a local area network and accessed by multiple computers. The NCB-1004 is shipped with the default IP address 192.168.0.233.

The following procedures describe the two ways to connect to the NCB-1004.

Connecting the NCB-1004 to a Single Computer

To use the NCB-1004 for the first time, you will most likely need to connect the NCB-1004 directly to a single computer. After this connection is made, you can change the unit’s IP address to be suitable for your network. (See the next section “Changing the IP Address.”

1.Connect the NCB-1004 to a Windows-based computer using a standard ethernet cable. In general, a standard “straight” ethernet cable should be used. If the PC’s ethernet jack is not auto-switching, it may be necessary to use a cross-over cable.

2.Supply power to the NCB-1004 with the included power supply.

3.In Windows, open the Network Connections control panel. (Start > Control Panel > Network Connections)

4.A Local Area Connection should be listed. Right-Click on Local Area Connection, and select Properties.

5.Scroll down the list in the Local Area Connection Properties, click on Internet Protocol (TCP/IP), and click the Properties button.

6.Enter the information as shown in the picture below:

7. Note that the last number in the IP address in the picture above is 232, rather than 233.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions Page Contents Product Overview FeaturesUnpacking Installation and Power-OnRS-422 Outputs Front and Rear Panel FeaturesConnecting the NCB-1004 to a Single Computer Connecting to the NCB-1004Overview Enter the address http//192.168.0.233 Connecting to the NCB-1004Connecting the NCB-1004 to a Local Area Network Changing the IP Address of the NCB-1004 ProcedureRequired Software Changing the IP Address of the NCB-1004 To move the cursor, use arrow keys or the following keys Basic Remote Control of IMD Monitors System ConfigurationRemote Control with Image Video Pass-Through System ConfigurationRemote Control with TSL Pass-Through Target Monitor Web InterfaceWindow Management Web InterfaceKey & Image Enhancement Test Mode Preset ConfigurationOSD Configuration & IMD Message Box SystemTable of Web Interface Commands Control Input SpecificationsSpecifications WarrantyMarshall Electronics, Inc

NCB-1004 specifications

The Marshall Electronics NCB-1004 is a versatile and high-performance camera that stands out in the realm of compact camcorders. Designed primarily for broadcast and video production applications, the NCB-1004 integrates cutting-edge features and technologies that cater to the demanding requirements of modern filmmakers and content creators.

At the heart of the NCB-1004 is a high-resolution image sensor that provides stunning image quality with vibrant color reproduction and exceptional detail. The camera supports full HD 1080p resolution, ensuring that every frame captured is crisp and clear, ideal for professional broadcasts and streaming applications. Its sensor technology also excels in low-light environments, making it suitable for various shooting conditions without compromising image quality.

One of the notable features of the NCB-1004 is its compact and lightweight design, which facilitates easy handling and portability. This makes it a preferred choice for on-the-go videographers who need a reliable solution that can be transported without hassle. Additionally, the camera is equipped with a robust housing that is both durable and weather-resistant, allowing it to perform in challenging outdoor environments.

The NCB-1004 integrates advanced connectivity options, including HDMI and SDI outputs, enabling seamless integration with existing broadcasting equipment and workflows. This connectivity is crucial for live streaming and multi-camera setups, providing flexibility and efficiency in production environments. Furthermore, the camera is also compatible with various lens options, broadening its adaptability for different shooting styles and purposes.

Another significant feature of the NCB-1004 is its customizable settings, allowing users to adjust various parameters such as exposure, focus, and white balance. This level of control ensures that filmmakers can capture their vision precisely, further amplified by its built-in monitoring tools, which provide real-time feedback on image quality and settings adjustments.

In summary, the Marshall Electronics NCB-1004 is a powerful and feature-rich camera that combines high-definition performance, advanced connectivity, and user-friendly controls, making it an excellent choice for professional video production. Its portability and durability add to its appeal, making it a reliable solution for both studio and field work. As technology continues to evolve, the NCB-1004 remains well-equipped to meet the demands of today's content creators.
Top Page Image Contents