Marshall electronic V-R171-IMD-HDSDI manual Maintenance, Screen Cleaning, Faceplate Dusting

Page 23

Specifications (continued)

Maintenance

Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the screen to avoid damaging the LCD.

Faceplate Dusting

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface, attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

23

Image 23
Contents Operating Instructions Page Contents Product Overview FeaturesUnpacking Installation and Initial SetupInstallation Connections, Power-On and Initial SetupPower Button Top and Front Panel FeaturesHD-SDI Input and Output Rear Panel FeaturesStructure Overview Compatible Input FormatsOn-Screen Menu Main Menu and Navigation On-Screen MenuMarkers Marker Setup SubmenuCenter Marker Marker Setup SubmenuMarker Background Ctemp/Gamma Video Configuration SubmenuMonochrome Mode Blue-Only ModeAspect Ratio Settings Video Configuration SubmenuPixel-to-Pixel Mode Curtain Color User-Definable Function Buttons System Configuration SubmenuSaving and Loading User Presets Gray LevelsStatus Display OSD Configuration SubmenuIMD State OSD Tally OSD Configuration SubmenuAudio Monitor LED TallyTime Code IMD Protocol IMD Configuration SubmenuOverview IMD Configuration Submenu Tally Source Service SubmenuIMD Tally Mode Panel SpecificationsFaceplate Dusting MaintenanceScreen Cleaning Warranty