Marshall electronic QV171-HDSDI Maintenance, Warranty, Screen Cleaning, Faceplate Dusting

Page 27

Specifications (continued)

Maintenance

Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the screen to avoid damaging the LCD.

Faceplate Dusting

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface, attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

Warranty

Marshall Electronics warranties to the first consumer that this QV171-HDSDILCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice.

27

Image 27
Contents Operating Instructions Page Contents Page Product Overview FeaturesUnpacking Installation and Initial SetupInstallation Connections, Power-On and Initial SetupPower Button Top and Front Panel FeaturesRS-422/485 Serial Interface Rear Panel FeaturesCh.3 Ch.4 Quad Mode and LayoutsCompatible Input Formats Ch.1 Ch.2Ch.1 Ch.3Ch.2 Ch.3 Ch.4 Structure Overview On-Screen MenuMain Menu and Navigation Video Configuration SubmenuMonochrome Mode Blue-Only ModePixel-to-Pixel Mode Aspect Ratio Settings Framelock Preference Analog Phase DVI-Analog or VGA input onlyCurtain Color Ctemp/GammaUser-Definable Function Buttons System Configuration SubmenuOSD Configuration Submenu Saving and Loading User PresetsIMD State Time Code Status DisplayRGY OSD TallyCC Monitor Closed Captioning Audio MonitorIMD Group # IMD Configuration SubmenuOverview IMD ID #Tally Source IMD ProtocolIMD Tally Mode IMD Baud RateIMD Name S/N IMD Fixed String IMD Fixed Submenu IMD Fixed Color IMD Fixed AlignSoftware Version Display Service SubmenuPanel SpecificationsFaceplate Dusting MaintenanceWarranty Screen CleaningMarshall Electronics, Inc