Subwoofer Placement

Caution! The subwoofer has built-in electronics.

•Do not place the cabinet near sources of heat such as furnace registers or radiators.

•Do not allow water or other liquids into the unit. •Allow some air circulation at the rear of the unit.

If the subwoofer is used only for LFE reproduction, it can be placed almost anywhere. If more than one subwoofer is used, placing them in different locations tends to even out possible room resonance irregularities.

If the subwoofer is used with a crossover or Integrator to reproduce the low frequency portion of the main channels then placement is a little more important. The subwoofer(s) preferably should be approximately the same distance from the main listening area as the main speakers. With one subwoofer the best position is usually somewhere between the main speakers but behind them a few feet if possible in order to maintain good stereo imaging.

The use of two subwoofers allows the low frequency signal to be processed in stereo by the crossover unit, and, therefore to provide the best possible imaging. In this case, it is preferable that the subwoofers be placed somewhat near each main speaker. Good placement is anywhere from between the speakers, near each speaker, or at the side walls.

For LFE (“point 1”) channel use, corner placement is often ideal, providing maximum output.

Center placement against the front wall is often optimum for music or movie systems where the subwoofer is used to reproduce left/right channel bass. It provides high output and good “imaging”.

Higher output is achieved when the subwoofer is placed near a wall and even more output is available when placed near a corner of the room. If very high output is desired in large rooms corner placement can be used with little trade- off in sound quality. For use in very large rooms, greater than 4,000 ft3, more than one SS2 may be required if very high playback levels are desired.

Dual corner placement provides maximum output from each sub, higher total output, good “imaging”and more even room response.

Dual subs near the main speakers provide the higher output of dual subs combined with the best “imaging”and most even room response.

Dual subs at the side walls provide the higher output of dual subs, high output from each sub, good “imaging”and even room response.

SS2 specifications

Thiel Audio Products has long been renowned for its commitment to audio excellence, and the SS2 subwoofer exemplifies this dedication. Designed to complement Thiel's full-range loudspeakers, the SS2 delivers deep, rich bass while maintaining the clarity and precision expected from this prestigious brand.

One of the standout features of the SS2 is its advanced driver technology. The subwoofer employs a custom 12-inch woofer, engineered specifically for Thiel's acoustic requirements. This driver utilizes a rigid cone structure and a high-excursion capability to reproduce low frequencies with remarkable accuracy and minimal distortion. The result is a deep and powerful bass response that enhances every musical genre, from classical symphonies to modern electronic tracks.

Another key technology in the SS2 is its unique enclosure design. The cabinet is constructed using high-quality materials, ensuring durability while also minimizing unwanted resonances. The enclosure features a front-firing port that enhances low-frequency extension and response, allowing for seamless integration with the main speakers. This emphasis on solid, vibration-free construction ensures that sound remains pure, preserving the integrity of the audio signal.

The SS2 boasts a built-in amplifier, specifically tuned for optimal performance with the subwoofer. The amplifier delivers a substantial amount of power, allowing the SS2 to fill large rooms with powerful sound without compromising quality. With its adjustable crossover frequency, users can tailor the subwoofer's output to blend seamlessly with their existing audio system, resulting in a cohesive and immersive listening experience.

Connectivity options are another highlight of the SS2. The subwoofer includes both line-level and speaker-level inputs, making it compatible with various audio setups. This versatility ensures that whether users have a modern home theater system or a vintage stereo setup, the SS2 can be effortlessly integrated.

In summary, the Thiel Audio Products SS2 subwoofer combines cutting-edge technology, robust construction, and thoughtful design to provide a powerful yet refined audio experience. With its advanced driver and amplifier technologies, the SS2 stands out as an exceptional choice for audiophiles seeking to enhance their listening environments. Whether for music or movies, the SS2 is a worthy addition that brings deep bass and clarity to any sound system.