Palsonic TFTV680S owner manual Antenna Connection, Power Connection

Page 7

Preparations (continued)

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.

75-ohm coaxial cable (round cable)

Note:

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.

The aerial cable should not be bundled with the power cord and the like.

Power Connection

Household

AC-INPUT

Plug into AC outlet

power outlet

Bottom view

AC cord

1.Connecting the female plug to the AC socket on the unit.

2.Connecting the male plug to the wall outlet as illustrated.

Note:

This product should be operated only from the type of power source indicated on the marking label.

Always unplug the AC cord from power outlet when not using for a long period of time. This illustration is for reference only. The AC plug may be different on different models.

4

Image 7

Contents N111 Table of Contents Table of Contents Important Safety Precautions Important Safety Precautions Preparations Using the Remote ControlBatteries for the Remote Control Precautions on battery useAntenna Connection Power ConnectionVOL+ PowerIdentification of Controls Main UnitHdtv inputs Y, Pb/Cb, Pr/Cr, Audio L/MONO, R Antenna inputAV2 Inputs AV Outputs Sub input / Audio DVI input / AudioMenu Remote ControlPIP-POS Identifications of ControlsConnections DVD player Connect a DVD PlayerTo play DVD To Watch the PC screen Connect a DTV receiverTo Watch DTV Connect a PCTo play VCR Connect a VCR for RecordingTurning the Unit On and Off Turning the Unit On and OffViewing the Menus and Displays Storing Channels in Memory Automatically Manual Fine TuningViewing TV Programs Select a RegionSkipping Channel Manual SearchEditing Channels Editing Program Name Setting Favourite ChannelLocking TV Channels Setting Locking Function On or OffChanging Password Restart the unit to active your settingChanging Channels Adjusting the VolumeSelect input source signal Basic OperationReducing Picture Noise Setting PictureUsing the Preset Picture Mode Customising the PictureAdjusting Equalizer Setting SoundAdjusting the Sound Balance Adjusting the Headphone VolumeIGR German stereo system Broadcasts Setting SRS effectStereo/Bilingual Selection Nicam Broadcast SelectionChanging Screen Aspect Ratio Setting SystemSetting Colour System Setting Sound SystemSystem Setting POP Picture-out-Picture Changing Screen LayoutSelecting Screen Layout Press CH to select Off, POP, 6 Windows or 9 WindowsPIP Operations Using the PIP-POS buttonUsing the Active-WIN button Swap the Contents of the PIP Image and Main ImageChanging the Position of Image Adjustment in D-Sub/DVI ModeAdjusting Image Horizontal Size Adjusting the Screen AutomaticallyTo select H Position or V Position item Loading Default ValuesAdvanced Adjustment for Image Position Smoothing the PictureColour RED/GREEN/YELLOW/BLUE TeletextCH or CH VOL+ or VOLSymptoms Check item TroubleshootingTFT-LCD SpecificationsSupported Display Format AccessoriesTEL 02 9313