Palsonic TFTV385 owner manual Preparing the Remote Control, Effective range of the remote control

Preparing the Remote Control

Please install the batteries before using the remote control.

If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.

1 Open the battery cover. 2. Insert two size-AAA batteries 3 Replace the cover and slide in reverse until the lock snaps.

(Slide the cover while	(Place the batteries with their
pressing down.)	terminals corresponding to the (+
	and (-) indications in the battery)
	compartment.)
Effective range of the remote control		Notes:

1. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.

2. Do not drop or dampen the remote control.

3. Do not disassemble the remote control.

4. There should be no obstacle between the TV and the transmitter.

5. Use the remote control within the effective range as shown in the figure on the left.

6. If the remote control does not work, please check whether the batteries are exhausted or if they have been installed properly.

7. When direct sunlight, and incandescent lighting, fluorescent lamp or any other strong light shines on the remote sensor of the TV, the remote operation can be come erratic.

8. Do not mix different types of batteries in the remote.

7