Fuse Replacement, Specifications | Thiel Audio Products SS3, SS4

Fuse Replacement

If the subwoofer is completely dead, with no indicator lights on, the main fuse has probably blown and will need to be replaced. The fuse should be replaced only with an equivalent type. The fuse type is 5 x 20 mm size, slo-blow or time delay type, with a rating of 5 amp for 230 volt units and 10 amp for 115 volt units. The BUSS number is GMC-5A or GMC-10A, respectively. Littlefuse numbers are 232005 or 218010. Or contact THIEL for a replacement fuse.

Specifications

Amplifier	Type					Switching, Class D
	Power output (at 120 or 240 line voltage)		.............................................................................			1000 watts, RMS
	Line voltage					90-130 or 180-260
Cabinet	Response	Normal input: 12 Hz–300 Hz, ±0.5 dB; LFE input 17 Hz–300 Hz, ±0.5 dB
	Bandwidth		Normal input 10-800 Hz, ±3 dB; LFE input: 16–800 Hz, ±3 dB
	Sensitivity				1 volt for 120 dB @ 1 m, 4π
				SS2	SS3	SS4
	Size (inches	height, width, depth)		231/2, 11, 211/2	34, 16, 221/2	51, 19, 261/2
	Weight (pounds)			108	167	290
	Driver description			Two 10"	Two 12"	Two 15"
	Driver displacement (cu in)			130	200	330
	Output dB @20Hz / 30Hz (corner placement)			105 /112	109 /116	113 /120

Warranty

THIEL warrants every THIEL SmartSub system against defects in materials and workmanship to the original owner for a period of ten years from the date of purchase. THIEL will, at no charge, replace any defective part and make any repairs necessary to ensure its proper performance when the defective unit is returned to us postpaid.

This warranty does not cover damage due to accident or abuse and is void if the unit has been tampered with.

This warranty is automatic and no registration is required. This warranty gives you specific legal rights. You may also have other rights which are particular to your state.