About This Guide

Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure-PHR-S250UAB

Thank you for choosing the PHR-S250UAB portable IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure. This portable size enclosure support 2.5” SATA Hard drive. It is simple to install and comes with all the parts you need to create a external IEEE 1394A and 1394B FireWire/ Hi-Speed USB2.0 device.

Before you begin using the PHR-S250UAB, be sure to read this manual in its entirety.

This guide contains:

•Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure

•Hardware Installation

•Software Installation

System Requirements

For Mac

•Any Macintosh desktop or NoteBook computer with USB or FireWire port ready

•MasOS X 10.1.x to 10.7.x and above

For PC

•Pentium II or compatible Desktop or Notebook with USB or IEEE 1394A and 1394B FireWire port ready.

•WindowsXP, Windows Vista and Windows7

•USB2.0 port is required for Hi-Speed USB2.0 transfer speed

Using AC/DC Adapter (optional)

Basically, if you connect the PHR-S250UAB directly into built-in FireWire or USB port, AC/DC adapter is not required. However

(1)if USB connection dose not response, or USB port is disable due to power surge error message

(2)the PHR-S250UAB Enclosure is connected to a CardBus to FireWire host adapter, or 4-pin iLink port AC/DC adapter is required.