®
25
USB1500 Wireless PC LAN Adapter
Chapter 5 :
Troubleshooting
This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you diagnose and solve the problem.
5.1 Problems During Driver Installation
PROBLEM | CORRECTIVE ACTION |
The ParkerVision Wireless USB LAN Adapter is not working after the driver installation
Windows does not auto- detect the ParkerVision Wireless USB LAN Adapter
Make sure the driver software is installed BEFORE you connect your wireless USB LAN adapter to your computer. Failure to install the software fi rst may result in the LAN adapter being recognized incorrectly.
Reonnect the USB adapter to your computer’s port again. The Power and Link LED should be on if the adapter is properly inserted.
Make sure there is no hardware confl ict between your ParkerVision Wireless LAN Adapter and other hardware in your computer. If there is a confl ict, you need to set your I/O and IRQ manually.
Restart your computer.
Do a manual scan of your computer hardware.
In Windows 2000, click Start, Settings, Control Panel, System, Hardware, Hardware
Wizard.
In Windows XP, click Start, Control Panel, Performance and Maintenance, System, Hardware, Device Manager. Then
Check your USB port and make sure there is no hardware confl ict.
Try an alternate USB port if one is available on your computer.
Contact ParkerVision Customer Support